SLLG013SL
Millex® hydrophilic PTFE syringe filter
pore size 0.2 μm, diam. 13 mm, sterile
Manufacturer: Millipore
Synonym(S): 0.2 μm PTFE syringe filter, Millex-LG 13MM Filter Unit, Millex-LG Filter Unit, Millex-LG syringe filter, disposable syringe filter, sterile syringe filter, syringe filter
Select a Size
| Pack Size | SKU | Availability | Price |
|---|---|---|---|
| 100 PKG | SLLG013SL-100-PKG | In Stock | ₹ 51,080.00 |
SLLG013SL - 100 PKG
In Stock
Quantity
1
Base Price: ₹ 51,080.00
GST (18%): ₹ 9,194.40
Total Price: ₹ 60,274.40
material
PTFE membranehigh-density polyethylene housing
Quality Level
400
sterility
ethylene oxide treatedsterile
product line
Millex®
feature
holdup volume< 50 μLhydrophilic Research Use Only (RUO)
manufacturer/tradename
Millex®
parameter
45 °C max. temp.75 psi max. inlet pressure
technique(s)
sterile filtration: suitable
H
21 mm
diam.
13 mm
Related Products
Description
- General description: The sterile 13 mm Millex®-LG unit is a syringe-operated filter unit for the sterilization of solvent or aqueous solutions (column eluates, tissue culture additives, HPLC samples, etc.) in volumes of 10 mL. The solvent-resistant, single-use Millex-LG unit incorporates the 0.2 μm hydrophilic PTFE membrane. Millex-LG filter unit is suitable for use as a syringe filter to sterilize and ultraclean solutions.
- Application: Millex®-LG, 0.20 μm has been used:in compound preparation in anhydrous dimethyl sulfoxide (DMSO) for in vitro experiments[1]as an organic solvent-resistant filter to prepare sterile 3,3′-dioctadecyloxacarbocyanine perchlorate (DiO) ethanol solution[2]to remove lipid aggregates in the preparation of small unilamellar vesicles (SUVs)[3]
- Legal Information: BIOPORE is a trademark of Merck KGaA, Darmstadt, Germany
Compare Similar Items
Show Difference
material: PTFE membranehigh-density polyethylene housing
Quality Level: 400
sterility: ethylene oxide treatedsterile
product line: Millex®
feature: holdup volume< 50 μLhydrophilic Research Use Only (RUO)
manufacturer/tradename: Millex®
parameter: 45 °C max. temp.75 psi max. inlet pressure
technique(s): sterile filtration: suitable
H: 21 mm
diam.: 13 mm
material:
PTFE membranehigh-density polyethylene housing
Quality Level:
400
sterility:
ethylene oxide treatedsterile
product line:
Millex®
feature:
holdup volume< 50 μLhydrophilic Research Use Only (RUO)
manufacturer/tradename:
Millex®
parameter:
45 °C max. temp.75 psi max. inlet pressure
technique(s):
sterile filtration: suitable
H:
21 mm
diam.:
13 mm
material: PTFE membranehigh-density polyethylene housing
Quality Level: 400
sterility: ethylene oxide treatedsterile
product line: Millex®
feature: holdup volume< 0.1 mLhydrophilic
manufacturer/tradename: Millex®
parameter: 125 mL/min water flow rate at 30 psi45 °C max. temp.75 psig max. inlet pressure
technique(s): sterile filtration: suitable
H: __
diam.: 25 mm
material:
PTFE membranehigh-density polyethylene housing
Quality Level:
400
sterility:
ethylene oxide treatedsterile
product line:
Millex®
feature:
holdup volume< 0.1 mLhydrophilic
manufacturer/tradename:
Millex®
parameter:
125 mL/min water flow rate at 30 psi45 °C max. temp.75 psig max. inlet pressure
technique(s):
sterile filtration: suitable
H:
__
diam.:
25 mm
material: PTFE membranepolypropylene housing
Quality Level: __
sterility: non-sterile
product line: Millex®
feature: holdup volume≤ 80 μL (after air purge)hydrophilic
manufacturer/tradename: Millex®
parameter: 45 °C max. temp.8.6 bar max. inlet pressure (125 psi)
technique(s): LC/MS: suitableUHPLC-MS: suitableUHPLC: suitableanalytical sample preparation: suitablemass spectrometry (MS): suitable
H: 27 mm
diam.: 33 mm
material:
PTFE membranepolypropylene housing
Quality Level:
__
sterility:
non-sterile
product line:
Millex®
feature:
holdup volume≤ 80 μL (after air purge)hydrophilic
manufacturer/tradename:
Millex®
parameter:
45 °C max. temp.8.6 bar max. inlet pressure (125 psi)
technique(s):
LC/MS: suitableUHPLC-MS: suitableUHPLC: suitableanalytical sample preparation: suitablemass spectrometry (MS): suitable
H:
27 mm
diam.:
33 mm
material: PTFE membranehigh-density polyethylene housing
Quality Level: 400
sterility: non-sterile
product line: Millex®
feature: holdup volume< 25 μLhydrophilic
manufacturer/tradename: Millex®
parameter: 45 °C max. temp.7 bar max. inlet pressure (100 psi)
technique(s): analytical sample preparation: suitableion chromatography: suitable
H: 21.1 mm
diam.: 13 mm
material:
PTFE membranehigh-density polyethylene housing
Quality Level:
400
sterility:
non-sterile
product line:
Millex®
feature:
holdup volume< 25 μLhydrophilic
manufacturer/tradename:
Millex®
parameter:
45 °C max. temp.7 bar max. inlet pressure (100 psi)
technique(s):
analytical sample preparation: suitableion chromatography: suitable
H:
21.1 mm
diam.:
13 mm