Diazyme Laboratories D-Dimer Assay
Manufacturer: Diazyme Laboratories
Select a Size
| Pack Size | SKU | Availability | Price |
|---|---|---|---|
| Each of 1 | 23-700-617-Each-of-1 | In Stock | ₹ 34,594.30 |
23-700-617 - Each of 1
In Stock
Quantity
1
Base Price: ₹ 34,594.30
GST (18%): ₹ 6,226.974
Total Price: ₹ 40,821.274
Certifications/Compliance
510(k) Cleared, EU: CE IVD
Description
D-Dimer Assay Kit
Concentration
Lab dependent
Includes
R1 and R2
Packaging Type
Universal
Form
Liquid
Content And Storage
D-Dimer assay reagents, calibrators, and controls should be stored at 2 to 8°C. DO NOT FREEZE
CE Marker
Yes
Type
Diagnostic
Linearity
Eleven levels of the D-Dimer linearity set were prepared by diluting a specimen containing 8.0 μg/mL FEU with saline according to Clinical and Laboratory Standards Institute EP6-A and tested on Modular P. Diazyme D-Dimer assay is linear from 0.15 to 8.0 μg/mL FEU.
Stability
The reagents, calibrators, and controls are sta-ble when stored as instructed until the expiration date on the label. Open reagent bottles are stable for 4 weeks if stored on board the refrigerated compartment of the Roche Modular P analyzer.
Related Products
Description
- Highly sensitive liquid stable latex enhanced immunoturbidimetric test kit, designed to work on most open clinical chemistry analyzers to provide rapid results with reduced reagent cost The D-Dimer Assay has a linearity of 0.15 - 8.0 μg/mL FEU with a correlation coefficient value of 0.939, slope of 0.979 and y intercept of -0.106 The following substances do not interfere with this assay at the levels tested less than 10% bias: Hemoglobin up to 500 mg/dL, Bilirubin 40 mg/dL, Bilirubin conjugated 40mg/dL, Triglycerides 1000 mg/dL, Ascorbic Acid 176 mg/dL, Rheumatoid Factor 100 IU/mL, Heparin 1.5 IU/mL and HAMA 490 ng/mL Measurement of D-Dimer is used as an aid in detecting the presence of intravascular coagulation and fibrinolysis For in vitro diagnostic use only
Compare Similar Items
Show Difference
Certifications/Compliance: 510(k) Cleared, EU: CE IVD
Description: D-Dimer Assay Kit
Concentration: Lab dependent
Includes: R1 and R2
Packaging Type: Universal
Form: Liquid
Content And Storage: D-Dimer assay reagents, calibrators, and controls should be stored at 2 to 8°C. DO NOT FREEZE
CE Marker: Yes
Type: Diagnostic
Linearity: Eleven levels of the D-Dimer linearity set were prepared by diluting a specimen containing 8.0 μg/mL FEU with saline according to Clinical and Laboratory Standards Institute EP6-A and tested on Modular P. Diazyme D-Dimer assay is linear from 0.15 to 8.0 μg/mL FEU.
Stability: The reagents, calibrators, and controls are sta-ble when stored as instructed until the expiration date on the label. Open reagent bottles are stable for 4 weeks if stored on board the refrigerated compartment of the Roche Modular P analyzer.
Certifications/Compliance: 510(k) Cleared, EU: CE IVD
Description: D-Dimer Assay Control Set
Concentration: Lab dependent
Includes: The Diazyme D-Dimer Control Set is a two-level set that is supplied in lyophilized form (2 x 1 mL). The controls are manufactured from human serum. The concentrations of the controls are lot specific and D-Dimer concentrations are expressed in μg/mL FEU.
Packaging Type: __
Form: __
Content And Storage: 2°C to 8°C. DO NOT FREEZE. Note: Store CONTROL tightly capped when not in use.
CE Marker: Yes
Type: Diagnostic
Linearity: __
Stability: Unopened vials: stability is up to the expiration date on label when stored at 2 to 8°C After reconstitution: stability is 14 days when stored at 2 to 8°C
Certifications/Compliance: 510(k) cleared, Health Canada registered
Description: __
Concentration: __
Includes: __
Packaging Type: __
Form: Liquid
Content And Storage: __
CE Marker: Yes
Type: Homocysteine Enzymatic Assay
Linearity: 3 to 50 μmol/L
Stability: __
