SLGPR33RB
Millex® polyethersulfone syringe filter
pore size 0.22 μm, diam. 33 mm, sterile, hydrophilic
Manufacturer: Millipore
Synonym(S): 0.22 μm PES syringe filter, Millex-GP syringe filter, Millipore Express® PES syringe filter, disposable syringe filter, polyethersulfone syringe filter, sterile syringe filter, syringe filter
Select a Size
| Pack Size | SKU | Availability | Price |
|---|---|---|---|
| 250 PKG | SLGPR33RB-250-PKG | In Stock | ₹ 85,410.00 |
SLGPR33RB - 250 PKG
In Stock
Quantity
1
Base Price: ₹ 85,410.00
GST (18%): ₹ 15,373.80
Total Price: ₹ 1,00,783.80
material
modified acrylic housingpolyethersulfone membrane
Quality Level
400
description
Female Luer-Lok/Male Luer slip
sterility
γ-irradiatedsterile
feature
hydrophilic
packaging
pk of 250
manufacturer/tradename
Millex® SLGPR33RBMillipore
parameter
≥150 mL/min water flow rate at 30 psi (2.1 bar)10.34 bar max. inlet pressure (150 psi)45 °C max. temp.
technique(s)
fast flow filtration: suitablelow protein-binding filtration: suitablesterile filtration: suitable
H
27 mm
Related Products
Description
- General description: Millex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex filters because of their unsurpassed quality and consistency. Millex filters not only feature minimal hold-up volume and faster flow rates, but they also withstand higher operating pressures and are chemically compatible with a range of samples and solvents to minimize leaching of extractable impurities.
- Application: Sterilization of tissue culture media, protein solutions or aqueous solutionsLow Protein Binding
- Features and Benefits: Tailored to a variety of applications based on membrane type, housing and validation ratingLow extractables and low absorption membranes for minimum sample lossesFaster flow rates and higher operating pressures for high performance needs
- Other Notes: This item is a direct replacement for SLGP033RB in countries where restricted.
- Legal Information: Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Compare Similar Items
Show Difference
material: modified acrylic housingpolyethersulfone membrane
Quality Level: 400
description: Female Luer-Lok/Male Luer slip
sterility: γ-irradiatedsterile
feature: hydrophilic
packaging: pk of 250
manufacturer/tradename: Millex® SLGPR33RBMillipore
parameter: ≥150 mL/min water flow rate at 30 psi (2.1 bar)10.34 bar max. inlet pressure (150 psi)45 °C max. temp.
technique(s): fast flow filtration: suitablelow protein-binding filtration: suitablesterile filtration: suitable
H: 27 mm
material:
modified acrylic housingpolyethersulfone membrane
Quality Level:
400
description:
Female Luer-Lok/Male Luer slip
sterility:
γ-irradiatedsterile
feature:
hydrophilic
packaging:
pk of 250
manufacturer/tradename:
Millex® SLGPR33RBMillipore
parameter:
≥150 mL/min water flow rate at 30 psi (2.1 bar)10.34 bar max. inlet pressure (150 psi)45 °C max. temp.
technique(s):
fast flow filtration: suitablelow protein-binding filtration: suitablesterile filtration: suitable
H:
27 mm
material: modified acrylic housingpolyethersulfone membrane
Quality Level: 400
description: __
sterility: γ-irradiatedsterile
feature: hydrophilic
packaging: pk of 50
manufacturer/tradename: Millex® SLGPR33RS
parameter: ≥150 mL/min water flow rate at 30 psi10.34 bar max. inlet pressure (150 psi)45 °C max. temp.
technique(s): fast flow filtration: suitablelow protein-binding filtration: suitablesterile filtration: suitable
H: 27 mm
material:
modified acrylic housingpolyethersulfone membrane
Quality Level:
400
description:
__
sterility:
γ-irradiatedsterile
feature:
hydrophilic
packaging:
pk of 50
manufacturer/tradename:
Millex® SLGPR33RS
parameter:
≥150 mL/min water flow rate at 30 psi10.34 bar max. inlet pressure (150 psi)45 °C max. temp.
technique(s):
fast flow filtration: suitablelow protein-binding filtration: suitablesterile filtration: suitable
H:
27 mm
material: polyethersulfone membranepolypropylene housing
Quality Level: 400
description: __
sterility: non-sterile
feature: holdup volume≤ 15 μL (after air purge)hydrophilic
packaging: __
manufacturer/tradename: Millex®
parameter: 10 bar max. inlet pressure (150 psi)45 °C max. temp.
technique(s): UHPLC: suitableanalytical sample preparation: suitablefast flow filtration: suitablelow protein-binding filtration: suitable
H: 21 mm
material:
polyethersulfone membranepolypropylene housing
Quality Level:
400
description:
__
sterility:
non-sterile
feature:
holdup volume≤ 15 μL (after air purge)hydrophilic
packaging:
__
manufacturer/tradename:
Millex®
parameter:
10 bar max. inlet pressure (150 psi)45 °C max. temp.
technique(s):
UHPLC: suitableanalytical sample preparation: suitablefast flow filtration: suitablelow protein-binding filtration: suitable
H:
21 mm
material: polyethersulfone membranepolypropylene housing
Quality Level: 400
description: __
sterility: non-sterile
feature: holdup volume≤ 15 μL (after air purge)hydrophilic
packaging: __
manufacturer/tradename: Millex®
parameter: 10 bar max. inlet pressure (150 psi)45 °C max. temp.48 L/min flow rate48 mL/min-cm2 water flow rate
technique(s): UHPLC: suitableanalytical sample preparation: suitablefast flow filtration: suitablelow protein-binding filtration: suitable
H: 21 mm
material:
polyethersulfone membranepolypropylene housing
Quality Level:
400
description:
__
sterility:
non-sterile
feature:
holdup volume≤ 15 μL (after air purge)hydrophilic
packaging:
__
manufacturer/tradename:
Millex®
parameter:
10 bar max. inlet pressure (150 psi)45 °C max. temp.48 L/min flow rate48 mL/min-cm2 water flow rate
technique(s):
UHPLC: suitableanalytical sample preparation: suitablefast flow filtration: suitablelow protein-binding filtration: suitable
H:
21 mm