06-710-560
Uniliner Liners for 1/4-Inch Packed Injection Port Conversion from Restek™
Manufacturer: Fischer Scientific
The price for this product is unavailable. Please request a quote
Product Type Specs
Uniliner Liner
Diameter (Metric) Inner
0.053 cm
For Use With (Equipment)
≤4 μL Injections
Quantity
Each
Diameter (Metric) Outer
0.5 cm
Related Products
Description
- Reduces solvent tailing 0.53mm ID version can be used in the direct (DI) or on-column (OC) injection mode Incorporates a gentle taper that seals the column and reduces dead volume in direct injection mode
Compare Similar Items
Show Difference
Product Type Specs: Uniliner Liner
Diameter (Metric) Inner: 0.053 cm
For Use With (Equipment): ≤4 μL Injections
Quantity: Each
Diameter (Metric) Outer: 0.5 cm
Product Type Specs:
Uniliner Liner
Diameter (Metric) Inner:
0.053 cm
For Use With (Equipment):
≤4 μL Injections
Quantity:
Each
Diameter (Metric) Outer:
0.5 cm
Product Type Specs: Uniliner Liner Adaptor
Diameter (Metric) Inner: 0.8 mm
For Use With (Equipment): Less Than 8 cm Injector Length
Quantity: Each
Diameter (Metric) Outer: __
Product Type Specs:
Uniliner Liner Adaptor
Diameter (Metric) Inner:
0.8 mm
For Use With (Equipment):
Less Than 8 cm Injector Length
Quantity:
Each
Diameter (Metric) Outer:
__
Product Type Specs: Uniliner Liner Adaptor
Diameter (Metric) Inner: 0.8 mm
For Use With (Equipment): 8 to 15 cm Injector Length
Quantity: Each
Diameter (Metric) Outer: __
Product Type Specs:
Uniliner Liner Adaptor
Diameter (Metric) Inner:
0.8 mm
For Use With (Equipment):
8 to 15 cm Injector Length
Quantity:
Each
Diameter (Metric) Outer:
__
Product Type Specs: Open Top UniLiner Liner
Diameter (Metric) Inner: 0.32, 0.53 mm
For Use With (Equipment): 0.25 in. Injection Ports to Troubleshoot Purge and Trap Units, 0.32 and 0.53 mm I.D. Column Direct Injection Only
Quantity: Each
Diameter (Metric) Outer: 0.5 cm
Product Type Specs:
Open Top UniLiner Liner
Diameter (Metric) Inner:
0.32, 0.53 mm
For Use With (Equipment):
0.25 in. Injection Ports to Troubleshoot Purge and Trap Units, 0.32 and 0.53 mm I.D. Column Direct Injection Only
Quantity:
Each
Diameter (Metric) Outer:
0.5 cm