Millex® polyethersulfone inline filter
pore size 0.22 μm, diam. 50 mm, sterile, hydrophilic, 1/4-1/2 in. hose barb with outlet bell
Manufacturer: Millipore
Synonym(S): 0.22 μm PES syringe filter, Express PLUS™ PES in-line filter, Millex-GP in-line filter with filling bell, Millex® 50 mm Filter Unit, Millex® GP50, disposable syringe filter, polyethersulfone syringe filter, sterile pressure filter unit
Select a Size
| Pack Size | SKU | Availability | Price |
|---|---|---|---|
| 10 PKG | SLGPB5010-10-PKG | In Stock | ₹ 21,950.01 |
SLGPB5010 - 10 PKG
In Stock
Quantity
1
Base Price: ₹ 21,950.01
GST (18%): ₹ 3,951.002
Total Price: ₹ 25,901.012
material
methacrylate-butadiene-styrene (MBS) housingpolyethersulfone membrane
Quality Level
400
sterility
γ-irradiatedsterile
product line
Millex®
feature
holdup volume< 1 mLhydrophilic Research Use Only (RUO)
manufacturer/tradename
Millex®
parameter
3.3 bar max. inlet pressure (50 psi)45 °C max. temp.~390 mL/min water flow rate at 15 psig
technique(s)
fast flow filtration: suitablelow protein-binding filtration: suitablepressure filtration: suitablesterile filtration: suitable (sterilization of tissue culture media, protein solutions or aqueous solutions)
diam.
50 mm
filtration area
19.6 cm2 (3 in2)
Related Products
Description
- General description: The bi-directionally supported Millex-GP50 filter is a sterilizing filter for aqueous solutions.It removes microorganisms, particles, precipitates, and undissolved powders largerthan 0.22 micron (μm). The sterile Millex-GP50 filter is non-pyrogenic and non-toxic. Thissingle-use product consists of a 0.22 μm membrane filter sealed in an acrylic housing.
- Application: Sterile filtration of tissue culture media, additives,buffers, and water.
- Preparation Note: For use with peristaltic pump, a pump drive and pump head that delivers a constant speed of 60 revolutions per minute (rpm) is recommended. This generates an average flow rate of 100 mL/min.Recommended tubing: 4-9.5 mm I.D. silicone rubber or latex tubing
- Other Notes: For use with peristaltic pump, a pump drive and pump head thatdelivers a constant speed of 60 revolutions per minute (rpm) is recommended. This generates anaverage flow rate of 100 mL/min. Recommended tubing: 4-9.5 mm I.D. silicone rubber or latex tubing
- Legal Information: EXPRESS PLUS is a trademark of Merck KGaA, Darmstadt, Germany
Compare Similar Items
Show Difference
material: methacrylate-butadiene-styrene (MBS) housingpolyethersulfone membrane
Quality Level: 400
sterility: γ-irradiatedsterile
product line: Millex®
feature: holdup volume< 1 mLhydrophilic Research Use Only (RUO)
manufacturer/tradename: Millex®
parameter: 3.3 bar max. inlet pressure (50 psi)45 °C max. temp.~390 mL/min water flow rate at 15 psig
technique(s): fast flow filtration: suitablelow protein-binding filtration: suitablepressure filtration: suitablesterile filtration: suitable (sterilization of tissue culture media, protein solutions or aqueous solutions)
diam.: 50 mm
filtration area: 19.6 cm2 (3 in2)
material: modified acrylic housingpolyethersulfone membrane
Quality Level: 400
sterility: γ-irradiatedsterile
product line: __
feature: hydrophilic
manufacturer/tradename: Millex® SLGPR33RBMillipore
parameter: ≥150 mL/min water flow rate at 30 psi (2.1 bar)10.34 bar max. inlet pressure (150 psi)45 °C max. temp.
technique(s): fast flow filtration: suitablelow protein-binding filtration: suitablesterile filtration: suitable
diam.: __
filtration area: __
material: modified acrylic housingpolyethersulfone membrane
Quality Level: 400
sterility: γ-irradiatedsterile
product line: __
feature: hydrophilic
manufacturer/tradename: Millex® SLGPR33RS
parameter: ≥150 mL/min water flow rate at 30 psi10.34 bar max. inlet pressure (150 psi)45 °C max. temp.
technique(s): fast flow filtration: suitablelow protein-binding filtration: suitablesterile filtration: suitable
diam.: 33 mm
filtration area: __
