Milligard® LPB 1.2 µm, Opticap® XL Capsule
inlet connection diam. 1.5 in., Opticap® XL 10, pore size 1.2 μm, cartridge nominal length 10 in. (25 cm)
Manufacturer: Millipore
Synonym(S): Opticap XL10 Milligard Low Protein Binding 1.2 μm 1-1/2 in. TC/TC
Select a Size
| Pack Size | SKU | Availability | Price |
|---|---|---|---|
| 1 EA | KWL9A10TT1-1-EA | In Stock | ₹ 42,445.29 |
KWL9A10TT1 - 1 EA
In Stock
Quantity
1
Base Price: ₹ 42,445.29
GST (18%): ₹ 7,640.152
Total Price: ₹ 50,085.442
material
mixed cellulose esters (MCE) (low protein-binding)polyester supportpolypropylene polypropylene housingpolypropylene vent capsilicone seal
Quality Level
400
reg. compliance
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility
non-sterile
Sterilization Compatibility
autoclavable compatible
product line
Opticap® XL 10
feature
hydrophilic
manufacturer/tradename
Opticap®
parameter
1.0 bar max. inlet pressure (15 psi) at 80 °C2.75 bar max. inlet pressure (40 psi) at 60 °C25 °C max. inlet temp.3.5 bar max. differential pressure (50 psid) at 25 °C5.5 bar max. inlet pressure (80 psi) at 23 °C80 psig max. inlet pressure
technique(s)
prefiltration: suitable
Related Products
Description
- General description: Device Configuration: Capsule
- Features and Benefits: Format: Single Layer
- Packaging: Double Easy-Open bag
- Other Notes: These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
- Specifications: Filter Grade: Low Protein Binding Milligard® Media
- Linkage: Replaces: KW19L1TC1
- Preparation Note: Sterilization Method3 autoclave cycles of 30 min @ 121 °C; not in-line steam sterilizable
- Analysis Note: Gravimetric Extractables: after a 5 L flush and 24 hours in water at controlled room temperature
- Legal Information: MILLIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
- Disclaimer: EMD Millipore Corporation certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
SAFETY INFORMATION
WGK
WGK 3
Compare Similar Items
Show Difference
material: mixed cellulose esters (MCE) (low protein-binding)polyester supportpolypropylene polypropylene housingpolypropylene vent capsilicone seal
Quality Level: 400
reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility: non-sterile
Sterilization Compatibility: autoclavable compatible
product line: Opticap® XL 10
feature: hydrophilic
manufacturer/tradename: Opticap®
parameter: 1.0 bar max. inlet pressure (15 psi) at 80 °C2.75 bar max. inlet pressure (40 psi) at 60 °C25 °C max. inlet temp.3.5 bar max. differential pressure (50 psid) at 25 °C5.5 bar max. inlet pressure (80 psi) at 23 °C80 psig max. inlet pressure
technique(s): prefiltration: suitable
material: __
Quality Level: __
reg. compliance: __
sterility: __
Sterilization Compatibility: __
product line: __
feature: __
manufacturer/tradename: __
parameter: __
technique(s): __
material: __
Quality Level: __
reg. compliance: __
sterility: __
Sterilization Compatibility: __
product line: __
feature: __
manufacturer/tradename: __
parameter: __
technique(s): __