Filter

Anionic surfactants are extracted with toluene and break up an ion pair, releasing bromophenol blue into a water layer, using the drop count method, a standard color reagent is then used to determine the concentration

Blank strips can be used to correct the measurement values without having to take time-consuming sample-pretreatment measures

Can be measured as turbidity reflectometrically in drinking water, groundwater and surface water

Convenient dispenser allows to select the right amount of pH paper for each application, highly accurate and well suited for most applications

Designed for determining pH values, provides sharp, clear changes within pH range of 4 to 8, for in-vitro diagnostic use

Detecting Acidity

Detection of a Base or Alkaline Material

Detection of a Neutral, Acidic, or Basic Solution

Determination of pH

Drinking water testing

Drinking water, environmental education, food and beverage, industrial water boiling and cooling, laundry and sanitation, water and wastewater

Drinking water, food/beverage testing

Drinking, food/beverage, pool water testing

Drinking, pool water testing

Environmental analysis and industrial in-process controls, calibration and checking of the products by certified buffer Solutions, rapid on-the-spot pH determination, non-bleeding even in strong alkaline solutions for accurate pH determination

Field testing, preliminary semi-quantitative analysis or quality control

Food and beverage, laundry and sanitation, industrial water boiling and cooling, water and wastewater

Food safety sanitizer testing

Foolproof pH test to determine if a solution is acidic or alkaline.

For accurate reading

For all laboratory moisture tests

For chlorine testing

For classroom demonstrations, hospital laboratories, general laboratories, industrial testing, food service, safety testing, emergency testing, agricultural testing

For classroom demonstrations, hospital laboratories, general laboratories, industrial testing, food service, safety testing, emergency testing, agricultural testing in-vitro testing

For classroom experiments or demonstrations

For concentration of quaternary sanitizers (alkyldimethyl benzyl ammonium compounds, Rocall II, Hyamine 3500)

For detecting chlorine and other oxidizing agents

For detection of ammonia in water

For detection of Lead, lead ions

For detection of total chlorine, field testing and quality-control procedures, provide a safe and economical alternative to reagent chlorine testing

For determining glucose in fruit juices and food

For determining orthophosphate in wastewater, soil samples, fertilizers and food

For free chlorine testing

For lab, field or classroom use, instant dip and read result

For laboratories, hospitals and universities worldwide

For long term storage, since they are protected against external influences

For long term storage, since they are protected against external influences, pH indicator papers are manufactured by impregnating high quality filter paper with indicator or mixed indicator solutions

For measuring formaldehyde, which is used as a disinfectant for surfaces and medical equipment, and also as a raw material for binders and fixing agents

For measuring the pH of wastewater, pure water, tap water, rain water and pond water

For pH measurements in turbid solutions, environmental analysis/process control

For precise pH determination

For preserving milk investigation samples

For quick and accurate matches

For rapid qualitative test paper to detect hydrogen sulfide, detect ∼5ppm of H2S in atmosphere or gas stream

For testing pH of solutions

For the rapid determination of pH values has led to many applications in laboratories and industry

For total chlorine testing

General purpose pH papers has a distinct color match at each full pH unit

Genetics taste test strips

Ideal for testing chlorine levels in drinking water, food and beverage, industrial water boiling and cooling, laundry and sanitation, water and wastewater

Ideal for the determination of lactic acid total lactic acid in beverages like wine, beer and fruit or vegetable juice after dilution

Industrial water boiling and cooling, laundry and sanitation, water and wastewater, food and beverage, drinking water

Industrial water boiling and cooling, water and wastewater, this test kit measures for high chlorine levels using the direct reading titrator method

Measuring pH or acidity in liquids

Moisture Detection

Municipal and well water testing

Municipal drinking water and wastewater testing, industrial wastewater and process control testing, environmental water testing

Nitrate testing

pH

pH Indicator

pH measurement

pH measurement directly in meat

pH Testing

pH Testing and Monitoring

Potassium iodine paper is used for the determination of oxidizing agents

Provide wide-range of five distinct color changes in pH range 2 through 10, color changes: red (pH 2), orange (pH 4), yellow (pH 6), green (pH 8), blue (pH 10)

Quickly detect Ammonia in solution from 3 to 5ppm.

Quickly detect Hydrogen Sulfide in water in concentrations as low as 5ppm.

Reagents and 100 strips to measure 0-100ppm Zn+2 in aqueous solution

Routine pH testing

Simply squeeze the handle and the chlorine reagent will be will be released into the sample

Suited for all media in environmental analysis and industrial in-process controls

Test drinking water, industrial water for boiling and cooling, laundry or sanitation water and wastewater, for chlorine, iodine and QAC testing

The lead test is suitable in environmental analysis, not only in all aqueous media but also on metal surfaces it can be used to distinguish very easy between plumbiferous and non-plumbiferous metals

The test can be used for the determination of potassium ions in drinking water and mineral water, industrial water, wastewater, beverages and soils after sample pretreatment

The test measures both ammonium ions and dissolved ammonia in e.g. groundwater and surface water, seawater, drinking water and aquarium water

The test strip can be used to check quaternary ammonium compounds, which have microbicidal properties and are mainly used in surface cleaners

To determine pH within half unit via distinct color changes

To determine quaternary concentrations less than 100ppm in just 2 min., specifically alkyldimethylbenzyl ammonium compounds, Rocall II and Hyamine 3500

To estimate the amount of titratable iodine in sanitizing solutions made with commercial iodophors

To measure the concentration of free available chlorine in sanitizing solutions

To measure the concentration of quaternary sanitizers, including n-Alkyldimethylbenzyl and/or n-Alkyl dimethyl ethyl benzyl ammonium chloride and Rocall II

To measure the concentration of quaternary sanitizers, particularly muli-quat broad range quaternary ammonium sanitizer solutions

To measure the concentration of quaternary sanitizers, specifically alkyldimethylbenzyl ammonium compounds, Rocall II and Hyamine 3500

To provide the convenience of precut paper strips and a cost comparable to two vials of old style litmus paper making them perfect for classroom use

To test urine and saliva, it offers an easy to read, single color match at every 0.2 to 0.3 interval from pH 5.5 to 8

Universal pH indicator system

Use existing LaMotte™ chlorine comparators or colorimeters

Use once meter has been calibrated with a primary standard

Use this strip to test for the presence of free Iodine, Chlorine, and Peroxides in a solution

Used for determination of chlorine in the area of water disinfection, where applications vary from treatment of drinking and wastewater to pool and spa sanitization

Used for determination of sucrose in beverages, eg. fruit/vegetable juice and refreshment drinks after appropriate sample pretreatment or dilution

Used for routine testing of water, industrial water and effluent

Used for the determination of formaldehyde in disinfecting and rinsing solutions

Used for the determination of magnesium ions in groundwater and surface water, drinking water, mineral water, boiler water and food after pretreatment

Used for the determination of ortho phosphate in soils, fertilizers and food after sample pretreatment

Used for the determination of sulfite ions

Used to check the integrity and efficiency of filtering systems as part of a general plan of in process controls

Used to test for tin and tin compounds in electroplating baths, reducing agents, stabilizers, catalysts, disinfectants, fungicides and mordants used in the textile industry and, more especially, in liquid foods

Water quality testing

With the total sugar test you can monitor glucose and fructose in food, such as potatoes, and in fruit juices and also optimize your winemaking process

1 Ea.

1 Each

1 Reel

1 Roll

10 Case

10 Pack

10 Papers/Blister Card; 10 Cards/Pk.

10 x 10 Books of 20 Strips

10/Cs.

100 Pack

100 Pk.

100 Pk., 12 Pk./Cs

100 Strips

100 Strips/Vial

100 Strips/Vial, 6 Vials/Pk.

100 Tests

100 Tests/Roll, 500 Total

100 Tests/Roll, 700 Total

100 Tests/Vial, 10 Vials/Cs.

100 to 150 Tests

100/Pk., 12 Pk./Cs

1000 Pack

1000 Tests

12 Pack

150 Tests

2 Pack

200 Pack

2000 Tests

24 g

24 Pack

25 Pk.

25 Strips/Vial

25 Test Strips

25 Test Strips/Bottle

25 Vials

250 Tests

3 Rolls

3 x 4.8 Rolls

40 Pack

400 Tests

5 Pack

5 Pk.

5 Rolls

50 Case

50 Pack

50 Pk.

50 Strips/Vial

50 Tests

500 Pack

5000 Strips

5000 Tests

6 Unit

6/Cs.

60 Tests

600 Pack

7/Pk.

Case of 6 vials. (Each vial contains 100 strips.)

Each

Pk. of 12 vials

Pk. of 12 Vials; 100 Strips/Vial

Pk. of 24 Vials; 100 Strips/Vial

Roll

10°C to 25°C

15°C to 25°C

15°C to 30°C

2°C to 8°C

Ambient temperatures

Out of direct sunlight, kept dry, keep vial sealed

Room Temperature

Store tightly sealed vial in a cool, dry storage area away from moisture; Keep out of direct sunlight

<3

0 to 1.5

0 to 13

0 to 14

0 to 2.5

0 to 3

0 to 6

0 to 7

0.2 to 2.0

0.5 to 13

0.5 to 5.5

1 to 11

1 to 12

1 to 14

1 to 2.5

1 to 5.5

1 to 6

1.8 to 3.8

10 to 12

10 to 14

11.5 to 14

12.5 to 14

2 to 10

2 to 9

2.8 to 4.4

3 to 5.5

3 to 7.5

3 to 8

3 to 9

3-6 pH

3.4 to 4.8

3.5 to 5.5

3.8 to 5.5

4 to 7

4 to 8

4 to 9

4.3 to 6.8

4.5 to 10

4.5 to 7.5

4.5 to 8.5

4.8 to 6.7

5 to 10

5 to 8

5 to 9

5.2 to 6.6

5.2 to 6.8

5.5 to 8

6 to 10

6 to 11

6 to 8

6 to 8.1

6 to 9.5

6.4 to 8

6.5 to 10

6.5 to 13

6.8 to 8.1

6.8 to 8.4

7 to 10

7 to 14

7.2 to 8.8

8 to 10

8 to 12

8 to 9.5

8 to 9.7

8.2 to 10

8.2 to 9.8

9 to 12

9 to 14

9.5 to 12

Detects hydrogen sulfide concentrations as low as 5ppm in water

0-4-10-20-50mg/L

0.2 to 7mg/L

0.2/0.3

0.25 to 1.2g/L

0.25 to 2.5g/L

0.5

0.5 pH

0.5 to 10mg/L

1

1 pH

1 to 25mg/L

1 to 45mg/L

1-3-10-30mg/L

10

10 to 200mg/L

10-20-40-60-100mg/L

10-25-50-100-200mg/L

10-25-50-100-250-500mg/L

10-25-50-100-250mg/L

11

13

15

2-5-20-50-100mg/L

20-40-100-200-500mg/L

250-450-700-1000-1500mg/L

3 to 60mg/L

5 to 100mg/L

5 to 120mg/L

5 to 20mg/L

6.4 to >8

65 to 650mg/L