CHGE75TE3
Millipore Express® SHC, Cartridge
pore size 0.5/0.2 μm, cartridge nominal length 5 in. (12.5 cm), Code 7, EPDM rubber seal
Manufacturer: Millipore
Synonym(S): Millipore Express SHC Cartridge Filter 5 in. 0.5/0.2 μm Code 7 EPDM
Select a Size
| Pack Size | SKU | Availability | Price |
|---|---|---|---|
| 3 EA | CHGE75TE3-3-EA | In Stock | ₹ 1,22,759.34 |
CHGE75TE3 - 3 EA
In Stock
Quantity
1
Base Price: ₹ 1,22,759.34
GST (18%): ₹ 22,096.681
Total Price: ₹ 1,44,856.021
material
EPDM rubber sealpolyethersulfone polypropylene polypropylene supportpolysulfone
Quality Level
400
reg. compliance
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility
non-sterile
Sterilization Compatibility
autoclavable compatiblesteam-in-place compatible
product line
EMPROVE® FilterMillipore Express®
feature
hydrophilic
manufacturer/tradename
Millipore Express®
parameter
≤13.3 mL/min air diffusion at 2.8 bar (40 psig) and 23 °C (in water)0.07 bar max. inlet pressure (1 psi) at 135 °C (Reverse)1.0 bar max. inlet pressure (15 psi) at 135 °C (Forward)1.7 bar max. inlet pressure (25 psi) at 80 °C (Forward)1700 bar max. differential pressure (25 psi) at 80 °C (Forward)2.07 bar max. inlet pressure (30 psi) at 25 °C (Reverse)2100 mbar max. differential pressure (30 psi) at 25 °C (Reverse)340 mbar max. differential pressure (5 psi) at 135 °C (Forward)69 mbar max. differential pressure (1 psi) at 135 °C (Reverse)6900 mbar max. differential pressure (100 psi) at 25 °C (Forward)7 bar max. inlet pressure (100 psi) at 25 °C (Forward)
technique(s)
sterile filtration: suitable
Related Products
Description
- General description: Millipore Express® SHC filters have an on-board polyethersulfone membrane prefilter which protects the 0.2 μm membrane from premature plugging and extends filtration capacity, so you get sterilizing-grade performance with superior throughput. The CHGE75TE3 cartridge filter features a 0.5/0.2 μm pore size, a filtration area of 0.23 m2 and a Code 7 cartridge configuration.Millipore Express® SHC filters provide you with a single solution for a range of process fluids, minimizing validation efforts and simplifying filter inventory and stocking requirements. With Millipore Express® SHC filters, you increase productivity, shorten cycle-time and reduce cost.
- Application: Media additives Column protection Concentrated protein streams Cell harvest (post clarification) Caustics/pH adjusters Buffers CIP solution
- Features and Benefits: High capacity, high flux hydrophilic PES membranes Validated sterilizing-grade performance Easy wetting and integrity testing Superior throughput in high fouling streams, including media and protein containing solutions Increased capacity for improved process efficiency and economy Broad chemical compatibility across a wide pH range (1-14) — caustic compatible
- Packaging: Double Easy-Open bag
- Other Notes: These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
- Preparation Note: Sterilization Method25 forward or 22 forward and 3 reverse SIP cycles of 30 min @ 135 °C and 0.35 bar (5) or 3 forward SIP cycles of 30 min @ 135 °C and 1 bar (15 psid); 25 autoclave cycles of 60 min @ 126 °C
- Analysis Note: Bacterial RetentionSamples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
- Legal Information: ASTM is a registered trademark of American Society for Testing and Materials
Compare Similar Items
Show Difference
material: EPDM rubber sealpolyethersulfone polypropylene polypropylene supportpolysulfone
Quality Level: 400
reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility: non-sterile
Sterilization Compatibility: autoclavable compatiblesteam-in-place compatible
product line: EMPROVE® FilterMillipore Express®
feature: hydrophilic
manufacturer/tradename: Millipore Express®
parameter: ≤13.3 mL/min air diffusion at 2.8 bar (40 psig) and 23 °C (in water)0.07 bar max. inlet pressure (1 psi) at 135 °C (Reverse)1.0 bar max. inlet pressure (15 psi) at 135 °C (Forward)1.7 bar max. inlet pressure (25 psi) at 80 °C (Forward)1700 bar max. differential pressure (25 psi) at 80 °C (Forward)2.07 bar max. inlet pressure (30 psi) at 25 °C (Reverse)2100 mbar max. differential pressure (30 psi) at 25 °C (Reverse)340 mbar max. differential pressure (5 psi) at 135 °C (Forward)69 mbar max. differential pressure (1 psi) at 135 °C (Reverse)6900 mbar max. differential pressure (100 psi) at 25 °C (Forward)7 bar max. inlet pressure (100 psi) at 25 °C (Forward)
technique(s): sterile filtration: suitable
material:
EPDM rubber sealpolyethersulfone polypropylene polypropylene supportpolysulfone
Quality Level:
400
reg. compliance:
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility:
non-sterile
Sterilization Compatibility:
autoclavable compatiblesteam-in-place compatible
product line:
EMPROVE® FilterMillipore Express®
feature:
hydrophilic
manufacturer/tradename:
Millipore Express®
parameter:
≤13.3 mL/min air diffusion at 2.8 bar (40 psig) and 23 °C (in water)0.07 bar max. inlet pressure (1 psi) at 135 °C (Reverse)1.0 bar max. inlet pressure (15 psi) at 135 °C (Forward)1.7 bar max. inlet pressure (25 psi) at 80 °C (Forward)1700 bar max. differential pressure (25 psi) at 80 °C (Forward)2.07 bar max. inlet pressure (30 psi) at 25 °C (Reverse)2100 mbar max. differential pressure (30 psi) at 25 °C (Reverse)340 mbar max. differential pressure (5 psi) at 135 °C (Forward)69 mbar max. differential pressure (1 psi) at 135 °C (Reverse)6900 mbar max. differential pressure (100 psi) at 25 °C (Forward)7 bar max. inlet pressure (100 psi) at 25 °C (Forward)
technique(s):
sterile filtration: suitable
material: fluoroelastomer sealpolyethersulfone polypropylene polypropylene supportpolysulfone
Quality Level: 400
reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility: non-sterile
Sterilization Compatibility: autoclavable compatiblesteam-in-place compatible
product line: EMPROVE® FilterMillipore Express®
feature: hydrophilic
manufacturer/tradename: Millipore Express®
parameter: ≤13.3 mL/min air diffusion at 2.8 bar (40 psig) and 23 °C (in water)0.07 bar max. inlet pressure (1 psi) at 135 °C (Reverse)1.0 bar max. inlet pressure (15 psi) at 135 °C (Forward)1.7 bar max. inlet pressure (25 psi) at 80 °C (Forward)1700 bar max. differential pressure (25 psi) at 80 °C (Forward)2.07 bar max. inlet pressure (30 psi) at 25 °C (Reverse)2100 mbar max. differential pressure (30 psi) at 25 °C (Reverse)340 mbar max. differential pressure (5 psi) at 135 °C (Forward)69 mbar max. differential pressure (1 psi) at 135 °C (Reverse)6900 mbar max. differential pressure (100 psi) at 25 °C (Forward)7 bar max. inlet pressure (100 psi) at 25 °C (Forward)
technique(s): sterile filtration: suitable
material:
fluoroelastomer sealpolyethersulfone polypropylene polypropylene supportpolysulfone
Quality Level:
400
reg. compliance:
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility:
non-sterile
Sterilization Compatibility:
autoclavable compatiblesteam-in-place compatible
product line:
EMPROVE® FilterMillipore Express®
feature:
hydrophilic
manufacturer/tradename:
Millipore Express®
parameter:
≤13.3 mL/min air diffusion at 2.8 bar (40 psig) and 23 °C (in water)0.07 bar max. inlet pressure (1 psi) at 135 °C (Reverse)1.0 bar max. inlet pressure (15 psi) at 135 °C (Forward)1.7 bar max. inlet pressure (25 psi) at 80 °C (Forward)1700 bar max. differential pressure (25 psi) at 80 °C (Forward)2.07 bar max. inlet pressure (30 psi) at 25 °C (Reverse)2100 mbar max. differential pressure (30 psi) at 25 °C (Reverse)340 mbar max. differential pressure (5 psi) at 135 °C (Forward)69 mbar max. differential pressure (1 psi) at 135 °C (Reverse)6900 mbar max. differential pressure (100 psi) at 25 °C (Forward)7 bar max. inlet pressure (100 psi) at 25 °C (Forward)
technique(s):
sterile filtration: suitable
material: fluoroelastomer sealpolyethersulfone polypropylene polypropylene supportpolysulfone
Quality Level: 400
reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility: non-sterile
Sterilization Compatibility: autoclavable compatiblesteam-in-place compatible
product line: EMPROVE® FilterMillipore Express®
feature: hydrophilic
manufacturer/tradename: Millipore Express®
parameter: ≤13.3 mL/min air diffusion at 2.8 bar (40 psig) and 23 °C (in water)0.07 bar max. inlet pressure (1 psi) at 135 °C (Reverse)1.0 bar max. inlet pressure (15 psi) at 135 °C (Forward)1.7 bar max. inlet pressure (25 psi) at 80 °C (Forward)1700 bar max. differential pressure (25 psi) at 80 °C (Forward)2.07 bar max. inlet pressure (30 psi) at 25 °C (Reverse)2100 mbar max. differential pressure (30 psi) at 25 °C (Reverse)340 mbar max. differential pressure (5 psi) at 135 °C (Forward)69 mbar max. differential pressure (1 psi) at 135 °C (Reverse)6900 mbar max. differential pressure (100 psi) at 25 °C (Forward)7 bar max. inlet pressure (100 psi) at 25 °C (Forward)
technique(s): sterile filtration: suitable
material:
fluoroelastomer sealpolyethersulfone polypropylene polypropylene supportpolysulfone
Quality Level:
400
reg. compliance:
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility:
non-sterile
Sterilization Compatibility:
autoclavable compatiblesteam-in-place compatible
product line:
EMPROVE® FilterMillipore Express®
feature:
hydrophilic
manufacturer/tradename:
Millipore Express®
parameter:
≤13.3 mL/min air diffusion at 2.8 bar (40 psig) and 23 °C (in water)0.07 bar max. inlet pressure (1 psi) at 135 °C (Reverse)1.0 bar max. inlet pressure (15 psi) at 135 °C (Forward)1.7 bar max. inlet pressure (25 psi) at 80 °C (Forward)1700 bar max. differential pressure (25 psi) at 80 °C (Forward)2.07 bar max. inlet pressure (30 psi) at 25 °C (Reverse)2100 mbar max. differential pressure (30 psi) at 25 °C (Reverse)340 mbar max. differential pressure (5 psi) at 135 °C (Forward)69 mbar max. differential pressure (1 psi) at 135 °C (Reverse)6900 mbar max. differential pressure (100 psi) at 25 °C (Forward)7 bar max. inlet pressure (100 psi) at 25 °C (Forward)
technique(s):
sterile filtration: suitable
material: polyethersulfone polypropylene polypropylene supportpolysulfone silicone seal
Quality Level: 400
reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility: non-sterile
Sterilization Compatibility: autoclavable compatiblesteam-in-place compatible
product line: EMPROVE® FilterMillipore Express®
feature: hydrophilic
manufacturer/tradename: Millipore Express®
parameter: ≤13.3 mL/min air diffusion at 2.8 bar (40 psig) and 23 °C (in water)0.07 bar max. inlet pressure (1 psi) at 135 °C (Reverse)1.0 bar max. inlet pressure (15 psi) at 135 °C (Forward)1.7 bar max. inlet pressure (25 psi) at 80 °C (Forward)1700 bar max. differential pressure (25 psi) at 80 °C (Forward)2.07 bar max. inlet pressure (30 psi) at 25 °C (Reverse)2100 mbar max. differential pressure (30 psi) at 25 °C (Reverse)340 mbar max. differential pressure (5 psi) at 135 °C (Forward)69 mbar max. differential pressure (1 psi) at 135 °C (Reverse)6900 mbar max. differential pressure (100 psi) at 25 °C (Forward)7 bar max. inlet pressure (100 psi) at 25 °C (Forward)
technique(s): sterile filtration: suitable
material:
polyethersulfone polypropylene polypropylene supportpolysulfone silicone seal
Quality Level:
400
reg. compliance:
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility:
non-sterile
Sterilization Compatibility:
autoclavable compatiblesteam-in-place compatible
product line:
EMPROVE® FilterMillipore Express®
feature:
hydrophilic
manufacturer/tradename:
Millipore Express®
parameter:
≤13.3 mL/min air diffusion at 2.8 bar (40 psig) and 23 °C (in water)0.07 bar max. inlet pressure (1 psi) at 135 °C (Reverse)1.0 bar max. inlet pressure (15 psi) at 135 °C (Forward)1.7 bar max. inlet pressure (25 psi) at 80 °C (Forward)1700 bar max. differential pressure (25 psi) at 80 °C (Forward)2.07 bar max. inlet pressure (30 psi) at 25 °C (Reverse)2100 mbar max. differential pressure (30 psi) at 25 °C (Reverse)340 mbar max. differential pressure (5 psi) at 135 °C (Forward)69 mbar max. differential pressure (1 psi) at 135 °C (Reverse)6900 mbar max. differential pressure (100 psi) at 25 °C (Forward)7 bar max. inlet pressure (100 psi) at 25 °C (Forward)
technique(s):
sterile filtration: suitable