SVGLA47FF3
Durapore® 0.22 µm, OptiScale® Capsule
OptiScale® 47, filtration area 17.7 cm2
Manufacturer: Millipore
Synonym(S): Optiscale Durapore 0.22 μm 3/4 in. TC/TC
Select a Size
| Pack Size | SKU | Availability | Price |
|---|---|---|---|
| 3 EA | SVGLA47FF3-3-EA | In Stock | ₹ 19,535.00 |
SVGLA47FF3 - 3 EA
In Stock
Quantity
1
Base Price: ₹ 19,535.00
GST (18%): ₹ 3,516.30
Total Price: ₹ 23,051.30
material
PVDF membranePVDF vent capfluoroelastomer FKM sealpolycarbonate polypropylene support
Quality Level
400
reg. compliance
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility
non-sterile
Sterilization Compatibility
autoclavable compatible
product line
OptiScale® 47
feature
hydrophilic
manufacturer/tradename
OptiScale®
parameter
25 °C max. inlet temp.5.5 bar max. differential pressure (80 psid) at 25 °C5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
technique(s)
sterile filtration: suitable
Related Products
Description
- General description: Device Configuration: Capsule
- Other Notes: These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
- Preparation Note: Sterilization Method3 autoclave cycles of 60 min @ 126 °C
- Analysis Note: Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL
- Legal Information: Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
Compare Similar Items
Show Difference
material: PVDF membranePVDF vent capfluoroelastomer FKM sealpolycarbonate polypropylene support
Quality Level: 400
reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility: non-sterile
Sterilization Compatibility: autoclavable compatible
product line: OptiScale® 47
feature: hydrophilic
manufacturer/tradename: OptiScale®
parameter: 25 °C max. inlet temp.5.5 bar max. differential pressure (80 psid) at 25 °C5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
technique(s): sterile filtration: suitable
material:
PVDF membranePVDF vent capfluoroelastomer FKM sealpolycarbonate polypropylene support
Quality Level:
400
reg. compliance:
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility:
non-sterile
Sterilization Compatibility:
autoclavable compatible
product line:
OptiScale® 47
feature:
hydrophilic
manufacturer/tradename:
OptiScale®
parameter:
25 °C max. inlet temp.5.5 bar max. differential pressure (80 psid) at 25 °C5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
technique(s):
sterile filtration: suitable
material: PVDF membranePVDF vent capfluoroelastomer FKM sealpolycarbonate polypropylene support
Quality Level: 400
reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility: non-sterile
Sterilization Compatibility: autoclavable compatible
product line: OptiScale® 47
feature: hydrophilic
manufacturer/tradename: OptiScale®
parameter: 25 °C max. inlet temp.5.5 bar max. differential pressure (80 psid) at 25 °C5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
technique(s): sterile filtration: suitable
material:
PVDF membranePVDF vent capfluoroelastomer FKM sealpolycarbonate polypropylene support
Quality Level:
400
reg. compliance:
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility:
non-sterile
Sterilization Compatibility:
autoclavable compatible
product line:
OptiScale® 47
feature:
hydrophilic
manufacturer/tradename:
OptiScale®
parameter:
25 °C max. inlet temp.5.5 bar max. differential pressure (80 psid) at 25 °C5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
technique(s):
sterile filtration: suitable
material: Eastar™ housingpolyethersulfone membrane
Quality Level: 400
reg. compliance: __
sterility: sterile
Sterilization Compatibility: __
product line: Sterivex™
feature: holdup volume 2.2 mLhydrophilic
manufacturer/tradename: __
parameter: 3.1 bar max. inlet pressure (45 psi)45 °C max. temp.
technique(s): sterile filtration: suitable
material:
Eastar™ housingpolyethersulfone membrane
Quality Level:
400
reg. compliance:
__
sterility:
sterile
Sterilization Compatibility:
__
product line:
Sterivex™
feature:
holdup volume 2.2 mLhydrophilic
manufacturer/tradename:
__
parameter:
3.1 bar max. inlet pressure (45 psi)45 °C max. temp.
technique(s):
sterile filtration: suitable
material: Eastar™ housingpolyethersulfone membrane
Quality Level: 400
reg. compliance: __
sterility: sterile
Sterilization Compatibility: __
product line: Sterivex™
feature: holdup volume 2.2 mLhydrophilic
manufacturer/tradename: __
parameter: 3.1 bar max. inlet pressure (45 psi)45 °C max. temp.
technique(s): sterile filtration: suitable
material:
Eastar™ housingpolyethersulfone membrane
Quality Level:
400
reg. compliance:
__
sterility:
sterile
Sterilization Compatibility:
__
product line:
Sterivex™
feature:
holdup volume 2.2 mLhydrophilic
manufacturer/tradename:
__
parameter:
3.1 bar max. inlet pressure (45 psi)45 °C max. temp.
technique(s):
sterile filtration: suitable