SHVEA47FF3
Millipore Express® SHRP, OptiScale® Capsule
filtration area 17.7 cm2, OptiScale® 47, pore size 0.5/0.1 μm
Manufacturer: Millipore
Synonym(S): Optiscale 47mm Millipore Express SHR 0.5/0.1 μm 3/4 in. TC/TC
Select a Size
| Pack Size | SKU | Availability | Price |
|---|---|---|---|
| 3 EA | SHVEA47FF3-3-EA | In Stock | ₹ 23,568.63 |
SHVEA47FF3 - 3 EA
In Stock
Quantity
1
Base Price: ₹ 23,568.63
GST (18%): ₹ 4,242.353
Total Price: ₹ 27,810.983
material
PVDF vent capfluoroelastomer FKM sealpolycarbonate polyethersulfone polypropylene support
Quality Level
400
reg. compliance
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility
non-sterile
Sterilization Compatibility
autoclavable compatible
product line
OptiScale® 47
feature
hydrophilic
manufacturer/tradename
Millipore Express®
parameter
25 °C max. inlet temp.5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
technique(s)
sterile filtration: suitable
Related Products
Description
- General description: Device Configuration: Capsule
- Other Notes: These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
- Preparation Note: Sterilization Method3 autoclave cycles of 60 min @ 126 °C
- Analysis Note: Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL
- Legal Information: MILLIPORE EXPRESS is a registered trademark of Merck KGaA, Darmstadt, Germany
Compare Similar Items
Show Difference
material: PVDF vent capfluoroelastomer FKM sealpolycarbonate polyethersulfone polypropylene support
Quality Level: 400
reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility: non-sterile
Sterilization Compatibility: autoclavable compatible
product line: OptiScale® 47
feature: hydrophilic
manufacturer/tradename: Millipore Express®
parameter: 25 °C max. inlet temp.5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
technique(s): sterile filtration: suitable
material:
PVDF vent capfluoroelastomer FKM sealpolycarbonate polyethersulfone polypropylene support
Quality Level:
400
reg. compliance:
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility:
non-sterile
Sterilization Compatibility:
autoclavable compatible
product line:
OptiScale® 47
feature:
hydrophilic
manufacturer/tradename:
Millipore Express®
parameter:
25 °C max. inlet temp.5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
technique(s):
sterile filtration: suitable
material: PVDF vent capfluoroelastomer FKM sealmixed cellulose esters (MCE) prefilterpolycarbonate polyethersulfone polypropylene support
Quality Level: 400
reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility: non-sterile
Sterilization Compatibility: autoclavable compatible
product line: OptiScale® 47
feature: hydrophilic
manufacturer/tradename: Millipore Express®
parameter: 25 °C max. inlet temp.5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
technique(s): sterile filtration: suitable
material:
PVDF vent capfluoroelastomer FKM sealmixed cellulose esters (MCE) prefilterpolycarbonate polyethersulfone polypropylene support
Quality Level:
400
reg. compliance:
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility:
non-sterile
Sterilization Compatibility:
autoclavable compatible
product line:
OptiScale® 47
feature:
hydrophilic
manufacturer/tradename:
Millipore Express®
parameter:
25 °C max. inlet temp.5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
technique(s):
sterile filtration: suitable
material: PVDF vent capfluoroelastomer FKM sealpolycarbonate polyethersulfone polypropylene support
Quality Level: 400
reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility: non-sterile
Sterilization Compatibility: autoclavable compatible
product line: OptiScale® 47
feature: hydrophilic
manufacturer/tradename: Millipore Express®
parameter: 25 °C max. inlet temp.5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
technique(s): sterile filtration: suitable
material:
PVDF vent capfluoroelastomer FKM sealpolycarbonate polyethersulfone polypropylene support
Quality Level:
400
reg. compliance:
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility:
non-sterile
Sterilization Compatibility:
autoclavable compatible
product line:
OptiScale® 47
feature:
hydrophilic
manufacturer/tradename:
Millipore Express®
parameter:
25 °C max. inlet temp.5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
technique(s):
sterile filtration: suitable
material: __
Quality Level: __
reg. compliance: __
sterility: __
Sterilization Compatibility: __
product line: MISSION®
feature: __
manufacturer/tradename: __
parameter: __
technique(s): __
material:
__
Quality Level:
__
reg. compliance:
__
sterility:
__
Sterilization Compatibility:
__
product line:
MISSION®
feature:
__
manufacturer/tradename:
__
parameter:
__
technique(s):
__