Filter

1-Pyrenebutanoic Acid Succinimidyl Ester

134C and 135CD Label Reagents

135CD Label Reagent

16plex Deuterated Label Reagent Set

2',7'-Difluorofluorescein

32plex Label Reagent Matched Set

4-Acetamido-4'-Maleimidylstilbene-2,2'-Disulfonic Acid

5-CR 6G SE

5-FAM SE

5-ROX SE

5-TAMRA

5-TAMRA SE

5(6)-FAM SE

5(6)-TAMRA

5(6)-TAMRA-X SE

555 Picolyl Azide Toolkit

594 Biocytin

6-FAM

6-JOE SE

6-ROX

6-TAMRA SE

633 Hydrazide

7-AAD Staining Solution

7-Amino-4-Methylcoumarin

Acryloyl-X SE

AHA

Alexa Fluor™ 350 Carboxylic Acid, tris(triethylammonium) salt

Alexa Fluor™ 488 Carboxylic Acid, tris(triethylammonium) salt

Alexa Fluor™ 532 Carboxylic Acid, tris(triethylammonium) salt

Alexa Fluor™ 532 NHS Ester (Succinimidyl Ester)

Alexa Fluor™ 546 Carboxylic Acid, tris(triethylammonium) salt

Alexa Fluor™ 555 Carboxylic Acid, tris(triethylammonium) salt

Alexa Fluor™ 568 Carboxylic Acid, tris(triethylammonium) salt

Alexa Fluor™ 594 Carboxylic Acid, tris(triethylammonium) salt

Alexa Fluor™ 633 Carboxylic Acid, tris(triethylammonium) salt

Alexa Fluor™ 647 Carboxylic Acid, tris(triethylammonium) salt

Alexa Fluor™ 750 Carboxylic Acid, tris(triethylammonium) salt

Alkoxyamine-PEG12-Biotin

Alkoxyamine-PEG4-Biotin

Alkylating Reagent

Alkyne

Amersham CyDye DIGE Fluor Cy2 Minimal Dye

Amersham CyDye DIGE Fluor Cy5 Minimal Dye

Amersham CyDye DIGE Fluor Labeling Kit

Amine Compound

Amine Reactive Tb Chelate

Amine-PEG11-Biotin

Amine-PEG2-Biotin

Amine-PEG3-Biotin

Amine-PEG4-Desthiobiotin

Aminopeptidase

aminoxyTMTsixplex™ Label Reagent Set

Angiotensin Converting Enzyme (ACE)

Antibody Azido Modification Kit

Antibody Biotinylation Kit

Antibody Conjugate Purification Kit

Antibody detection confirmation kit

Antibody Labeling Kit

ARP

Azide

Azide-labeled Sugar

Biocytin

Biocytin Hydrazide

Biotin Alkyne

Biotin Azide

Biotin Labeling Kit-NH2

Biotin Protein Analysis Detection Kit

Biotin Quantitation Assay Kit

Biotin Quantitation Kit

Biotin-4-Fluorescein

Biotin-LC-Hydrazide

Biotin-PEG12-DBCO

Biotin-XX SE

BMCC-Biotin

Buffer

Cadaverine

Calbiochem BAPTA/AM

Calbiochem Cleland’s Reagent

Calbiochem DM-NITROPHEN Reagent

Calbiochem MMP-2/MMP-7 Substrate

Calbiochem SPUTOLYSIN Reagent

Calbiochem TPEN

Carboxypeptidase B

Cell Labeling Kit

Cell Reaction Buffer Kit

Click-iT™ Plus Alexa Fluor™ 647 Picolyl Azide Toolkit

Click-iT™ Plus OPP Alexa Fluor™ 594 Protein Synthesis Assay Kit

Click-iT™ Plus OPP Alexa Fluor™ 647 Protein Synthesis Assay Kit

Conjugate Purification Kit

Conjugation Kit

Coupling Catalyst

CPM

Crosslinker

Cy3 Bis NHS Ester

Cy3 bis-NHS Ester

Cy3 Hydrazide

Cy3 Maleimide

Cy3 Mono-Reactive Dye Pack

Cy3 NHS Ester

Cy3-Streptavidin

Cy5 Bis NHS Ester

Cy5 bis-NHS Ester

Cy5 Hydrazide

Cy5 Maleimide

Cy5 Mono-Reactive Dye Pack

Cy5-Streptavidin

Cy5.5 Bis NHS Ester

Cy5.5 Hydrazide

Cy5.5 Maleimide

Cy5.5 Mono-Reactive Dye Pack

Cy7 Bis NHS Ester

CyDye Post-Labeling Reactive Dye Pack

Cysteine Hydrochloride

Dabcyl Succinimidyl Ester

Dansyl Ethylenediamine

Digest Standard

Dipeptidylpeptidase IV

Disulfide Reducing Reagent

Dithiothreitol

DNP-X Succinimidyl Ester

DTNB

Dye

Dye Removal Column

DyLight 488 Antibody Labeling Kit

Elman's Reagent

Endoglycosidase H

Endoproteinase

Ficin

FITC

FL Propionic Acid

FL STP Ester

FL Sulfonated Succinimidyl Ester

Fluorescein-5-Isothiocyanate

Fluorescence Biotin Quantitation Kit

Fluorescent Dye 350-I Hydrazide

Fluorescent Dye 350-I Streptavidin

Fluorescent Dye 350-I Succinimidyl Ester

Fluorescent Dye 405-I Phalloidin

Fluorescent Dye 405-I Streptavidin

Fluorescent Dye 405-I Succinimidyl Ester

Fluorescent Dye 488-I Maleimide

Fluorescent Dye 488-I Phalloidin

Fluorescent Dye 488-I Succinimidyl Ester

Fluorescent Dye 510-M Streptavidin

Fluorescent Dye 514-I Phalloidin

Fluorescent Dye 514-I Succinimidyl Ester

Fluorescent Dye 532-I Streptavidin

Fluorescent Dye 555-C3 Alkyne

Fluorescent Dye 555-C3 Amine

Fluorescent Dye 555-C3 Azide

Fluorescent Dye 555-C3 Hydrazide

Fluorescent Dye 555-C3 Maleimide

Fluorescent Dye 555-C3 NHS Ester

Fluorescent Dye 555-I Hydrazide

Fluorescent Dye 555-I Maleimide

Fluorescent Dye 555-I Phalloidin

Fluorescent Dye 555-I Succinimidyl Ester

Fluorescent Dye 570-M Streptavidin

Fluorescent Dye 570-M Succinimidyl Ester (Blue)

Fluorescent Dye 581-C3.5 Acid

Fluorescent Dye 581-C3.5 Amine

Fluorescent Dye 581-C3.5 Maleimide

Fluorescent Dye 594-I Phalloidin

Fluorescent Dye 594-I Streptavidin

Fluorescent Dye 594-I Succinimidyl Ester

Fluorescent Dye 610-I Succinimidyl Ester

Fluorescent Dye 620-M Streptavidin

Fluorescent Dye 620-M Succinimidyl Ester (Green)

Fluorescent Dye 633-I Streptavidin

Fluorescent Dye 633-I Succinimidyl Ester

Fluorescent Dye 645-A Amine

Fluorescent Dye 647-I Azide

Fluorescent Dye 647-I Hydrazide

Fluorescent Dye 647-I Maleimide

Fluorescent Dye 647-I Phalloidin

Fluorescent Dye 647-I Succinimidyl Ester

Fluorescent Dye 649-C5 Acid

Fluorescent Dye 649-C5 Alkyne

Fluorescent Dye 649-C5 Azide

Fluorescent Dye 649-C5 bisNHS Ester

Fluorescent Dye 649-C5 Hydrazide

Fluorescent Dye 649-C5 Maleimide

Fluorescent Dye 678-C5.5 Acid

Fluorescent Dye 678-C5.5 Alkyne

Fluorescent Dye 678-C5.5 Azide

Fluorescent Dye 678-C5.5 bisAcid

Fluorescent Dye 678-C5.5 Hydrazide

Fluorescent Dye 678-C5.5 Maleimide

Fluorescent Dye 678-C5.5 NHS Ester

Fluorescent Dye 680-I Maleimide

Fluorescent Dye 680-I Streptavidin

Fluorescent Dye 680-I Succinimidyl Ester

Fluorescent Dye 700-I Hydrazide

Fluorescent Dye 700-I Maleimide

Fluorescent Dye 700-I Streptavidin

Fluorescent Dye 700-I Succinimidyl Ester

Fluorescent Dye 749-C7 Acid

Fluorescent Dye 749-C7 Alkyne

Fluorescent Dye 749-C7 Amine

Fluorescent Dye 749-C7 Azide

Fluorescent Dye 749-C7 bisNHS Ester

Fluorescent Dye 749-C7 Maleimide

Fluorescent Dye 750-I Maleimide

Fluorescent Dye 750-I Phalloidin

Fluorescent Dye 750-I Succinimidyl Ester

Fluorescent Dye 780-M Streptavidin

Fluorescent Dye 780-M Succinimidyl Ester (Red)

Fluorescent Dye 790-I Acid

Fluorescent Dye 790-I Amine

Fluorescent Dye 790-I Hydrazide

Fluorescent Dye 790-I Maleimide

Fluorescent Dye 790-I Phalloidin

Fluorescent Dye 790-I Succinimidyl Ester

Fluorescent Dye AMCA Phalloidin

Fluorescent Dye California Red Phalloidin

Fluorescent Dye Eu-Streptavidin

Fluorescent Dye Fluorescein Phalloidin

Fluorescent Label

Fluorescent Labeling Reagent

Fluorescent Standard

Free Acid

Geranylgeranyl Alcohol Azide

Guanidine Hydrochloride

HABA

HPDP-Biotin

Hydrazide

Hydrazide-Biotin

Hydrazide-PEG4-Desthiobiotin

Hydroxylamine

Hydroxylamine Hydrochloride

Iodination Bead

Iodination Tube

Iodoacetamide Alkyne

Iodoacetic Acid

Iodoacetyl-LC-Biotin

Iodoacetyl-PEG2-Biotin

Isobaric Label Reagent

Isobaric Label Reagent Set

Isobaric Mass Tag Labeling Kit

Kinase Tracer 222

L-Homopropargylglycine

Label Reagent

Labeling Kit

Labeling Reagent

Lysine

Malachite Green Isothiocyanate

Maleimide

Maleimide Reagent

Maleimide-PEG11-Biotin

Maleimide-PEG2-Biotin

Mercaptoethanol

Mercaptoethylamine Hydrochloride

Methyl Methanethiosulfonate

Micro NHS-PEG4-Biotinylation Kit

Micro Sulfo-NHS-Biotinylation Kit

Micro Sulfo-NHS-LC-Biotinylation Kit

Micro Sulfo-NHS-SS-Biotinylation Kit

Molecular Probes Fluorescein biotin

Monobromobimane

Monochlorobimane

Myristic Acid

NEM

NHS Ester (Succinimidyl Ester)

NHS-Biotin

NHS-Desthiobiotin

NHS-Ester Reagent

NHS-Fluorescein

NHS-LC-Biotin

NHS-LC-LC-Biotin

NHS-PEG Solid-Phase Biotinylation Kit

NHS-PEG12-Biotin

NHS-PEG4 Biotinylation Kit

NHS-PEG4-Biotin

NHS-Rhodamine

NHS-SS-Biotin

O-GlcNAc Enzymatic Labeling System

Palmitic Acid

Papain

PDAM

Pentylamine-Biotin

Pepsin

Peptide

Phosphine-PEG3-Biotin

PNGase F Glycan Cleavage Kit

Protease

Protein Delivery Reagent

Protein Enrichment Kit

Protein Labeling Kit

Protein Reaction Buffer Kit

Protein Synthesis Assay Kit

Proteinase K

Pyridyldisulfide Derivative of R-phycoerythrin

Quantum Dot

QuikEase Kit

R-Phycoerythrin

Reductant Column

Reference Standard

SATA, heterobifunctional

Sodium Meta-Periodate

Succinimidyl Ester

Sulfo NHS-SS-Biotin

Sulfo-NHS-Acetate

Sulfo-NHS-Biotin

Sulfo-NHS-LC-Biotin

Sulfo-NHS-LC-Biotinylation Kit

Sulfo-NHS-LC-Desthiobiotin

Sulfo-NHS-LC-LC-Biotin

Sulfo-NHS-SS Biotinylation Kit

Sulfo-NHS-SS-Biotin

Sulfo-SBED Biotin Label Transfer Reagent

Sulfo-SHPP

Sulfonyl Chloride

TAMRA SE

Tetramethylrhodamine Alkyne

Tetramethylrhodamine Azide

Tetramethylrhodamine Cadaverine

Tetramethylrhodamine-5-(and-6)-Isothiocyanate

Tetramethylrhodamine-5-Iodoacetamide Dihydroiodide

Tetramethylrhodamine-5-isothiocyanate

Tetramethylrhodamine-5-Maleimide

TFPA-PEG3-Biotin

Thiol and Sulfide Quantitation Kit

Thiol Assay Kit

Thiol Compound

Thiol Reactive Tb Chelate

Thiophilic Adsorption Kit

Trypsin

Trypsin-EDTA

Urea

-15°C to -30°C

-20°C

-30°C to -10°C

• 33,000 units PNGase F enzyme, recombinant (500,000 units/mL), store at -20°C• 1 mL PNGase F 10X Buffer, store at -20°C

• 8 x 0.2 mg TMT10–126 Label Reagent• 8 x 0.2 mg TMT10–127N Label Reagent• 8 x 0.2 mg TMT10–127C Label Reagent• 8 x 0.2 mg TMT10–128N Label Reagent• 8 x 0.2 mg TMT10–128C Label Reagent• 8 x 0.2 mg TMT10–129N Label Reagent• 8 x 0.2 mg TMT10–129C Label Reagent• 8 x 0.2 mg TMT10–130N Label Reagent• 8 x 0.2 mg TMT10–130C Label Reagent• 8 x 0.2 mg TMT10–131 Label ReagentStore in freezer (–5 to –30°C).

• iodoTMT6-126 Label Reagent, 0.2 mg• iodoTMT6-127 Label Reagent, 0.2 mg• iodoTMT6-128 Label Reagent, 0.2 mg• iodoTMT6-129 Label Reagent, 0.2 mg• iodoTMT6-130 Label Reagent, 0.2 mg• iodoTMT6-131 Label Reagent, 0.2 mgUpon receipt store all products at -20°C.

• iodoTMT6-126 Label Reagent, 5 x 0.2 mg• iodoTMT6-127 Label Reagent, 5 x 0.2 mg• iodoTMT6-128 Label Reagent, 5 x 0.2 mg• iodoTMT6-129 Label Reagent, 5 x 0.2 mg• iodoTMT6-130 Label Reagent, 5 x 0.2 mg• iodoTMT6-131 Label Reagent, 5 x 0.2 mg• HES Buffer, 15 mL• Bond-Breaker TCEP Solution, 0.5 mL• DTT, No-Weigh Format, 8 x 7.7 mg• Trypsin, 5 x 20 μg• Trypsin Storage Solution, 250 μL• Albumin (bovine), 2.5 mgUpon receipt store all products at –20°C

• TMTpro-126 Label Reagent, 1 x 0.5 mg• TMTpro-127 N Label Reagent, 1 x 0.5 mg• TMTpro-127 C Label Reagent, 1 x 0.5 mg• TMTpro-128 N Label Reagent, 1 x 0.5 mg• TMTpro-128 C Label Reagent, 1 x 0.5 mg• TMTpro-129 N Label Reagent, 1 x 0.5 mg• TMTpro-129 C Label Reagent, 1 x 0.5 mg• TMTpro-130 N Label Reagent, 1 x 0.5 mg• TMTpro-130 C Label Reagent, 1 x 0.5 mg• TMTpro-131 N Label Reagent, 1 x 0.5 mg• TMTpro-131 C Label Reagent, 1 x 0.5 mg• TMTpro-132 N Label Reagent, 1 x 0.5 mg• TMTpro-132 C Label Reagent, 1 x 0.5 mg• TMTpro-133 N Label Reagent, 1 x 0.5 mg• TMTpro-133 C Label Reagent, 1 x 0.5 mg• TMTpro-134 N Label Reagent, 1 x 0.5 mgStore below -20°C.

• TMTpro-126 Label Reagent, 1 x 5 mg• TMTpro-127N Label Reagent, 1 x 5 mg• TMTpro-127C Label Reagent, 1 x 5 mg• TMTpro-128N Label Reagent, 1 x 5 mg• TMTpro-128C Label Reagent, 1 x 5 mg• TMTpro-129N Label Reagent, 1 x 5 mg• TMTpro-129C Label Reagent, 1 x 5 mg• TMTpro-130N Label Reagent, 1 x 5 mg• TMTpro-130C Label Reagent, 1 x 5 mg• TMTpro-131N Label Reagent, 1 x 5 mg• TMTpro-131C Label Reagent, 1 x 5 mg• TMTpro-132N Label Reagent, 1 x 5 mg• TMTpro-132C Label Reagent, 1 x 5 mg• TMTpro-133N Label Reagent, 1 x 5 mg• TMTpro-133C Label Reagent, 1 x 5 mg• TMTpro-134N Label Reagent, 1 x 5 mg• TMTpro-127D Label Reagent, 1 x 5 mg• TMTpro-128ND Label Reagent, 1 x 5 mg• TMTpro-128CD Label Reagent, 1 x 5 mg• TMTpro-129ND Label Reagent, 1 x 5 mg• TMTpro-129CD Label Reagent, 1 x 5 mg• TMTpro-130ND Label Reagent, 1 x 5 mg• TMTpro-130CD Label Reagent, 1 x 5 mg• TMTpro-131ND Label Reagent, 1 x 5 mg• TMTpro-131CD Label Reagent, 1 x 5 mg• TMTpro-132ND Label Reagent, 1 x 5 mg• TMTpro-132CD Label Reagent, 1 x 5 mg• TMTpro-133ND Label Reagent, 1 x 5 mg• TMTpro-133CD Label Reagent, 1 x 5 mg• TMTpro-134ND Label Reagent, 1 x 5 mg• TMTpro-134CD Label Reagent, 1 x 5 mg• TMTpro-135ND Label Reagent, 1 x 5 mgStore below -20°C.

• TMTpro-126 Label Reagent, 6 x 0.5 mg• TMTpro-127 N Label Reagent, 6 x 0.5 mg• TMTpro-127 C Label Reagent, 6 x 0.5 mg• TMTpro-128 N Label Reagent, 6 x 0.5 mg• TMTpro-128 C Label Reagent, 6 x 0.5 mg• TMTpro-129 N Label Reagent, 6 x 0.5 mg• TMTpro-129 C Label Reagent, 6 x 0.5 mg• TMTpro-130 N Label Reagent, 6 x 0.5 mg• TMTpro-130 C Label Reagent, 6 x 0.5 mg• TMTpro-131 N Label Reagent, 6 x 0.5 mg• TMTpro-131 C Label Reagent, 6 x 0.5 mg• TMTpro-132 N Label Reagent, 6 x 0.5 mg• TMTpro-132 C Label Reagent, 6 x 0.5 mg• TMTpro-133 N Label Reagent, 6 x 0.5 mg• TMTpro-133 C Label Reagent, 6 x 0.5 mg• TMTpro-134 N Label Reagent, 6 x 0.5 mgStore below -20°C.

• TMTpro-127D Label Reagent, 1 x 5 mg• TMTpro-128ND Label Reagent, 1 x 5 mg• TMTpro-128CD Label Reagent, 1 x 5 mg• TMTpro-129ND Label Reagent, 1 x 5 mg• TMTpro-129CD Label Reagent, 1 x 5 mg• TMTpro-130ND Label Reagent, 1 x 5 mg• TMTpro-130CD Label Reagent, 1 x 5 mg• TMTpro-131ND Label Reagent, 1 x 5 mg• TMTpro-131CD Label Reagent, 1 x 5 mg• TMTpro-132ND Label Reagent, 1 x 5 mg• TMTpro-132CD Label Reagent, 1 x 5 mg• TMTpro-133ND Label Reagent, 1 x 5 mg• TMTpro-133CD Label Reagent, 1 x 5 mg• TMTpro-134ND Label Reagent, 1 x 5 mg• TMTpro-134CD Label Reagent, 1 x 5 mg• TMTpro-135ND Label Reagent, 1 x 5 mgStore below -20°C.

• TMTpro-134C Label Reagent, 1 x 5 mg• TMTpro-135CD Label Reagent, 1 x 5 mgStore below -20°C.

• Vivid™ CYP450 Fluorogenic substrates• BACULOSOMES™ CYP450 reagents• Fluorescent standards• NADPH-regeneration system.Vivid™ CYP450 Fluorogenic substrates are also available separately.Store reaction buffers at +4°C or room temperature. Store BACULOSOMES™, the NADPH-regeneration system, and NADP+ at -80°C. Store the Vivid™ substrates and standards at +4°C, protected from light. (For long-term storage, resuspend in organic solvent and keep at -20°C.)

<-10°C

<-65°C

≤-70°C

0°C

0°C and -20°C

0°C to 20°C

1 kit containing sufficient material for 50 reactions based upon a 0.5 mL reaction volume.Store at 2-6°C.

1 tubeStore dessicated at -20°C, upon reciept

1 vial , store ≤ -20 °C, dessicate and protected from light.

1 vial, store at –5 to –30°C.

1 x 100 μg Alexa Fluor™ dye-picolyl azide1 x 4 mL Click-iT™ reaction buffer1 x 1.5 mL copper (II) sulfate1 x 500 μL copper protectant1 Click-iT™ buffer additiveEach k

1 x 100 μg Alexa Fluor™ dye-picolyl azide1 x 4 mL Click-iT™ reaction buffer1 x 1.5 mL copper (II) sulfate1 x 500 μL copper protectant1 Click-iT™ buffer additiveStore at 2 to 8°C

11 vials, store at –5 to –30°C

15°C to 30°C

2 vials, store at room temperature

2°C to 8°C

2°C to 8°C, protected from light

2°C to 8°C, protected from light. Reconstituted material may be stored for up to 2 weeks at -20°C in aliquots to avoid repeat freeze thaw cycles.

3 sets of 11 vials, store at –5 to –30°C

3 tubesStore dessicated at -20°C, upon reciept

3 vials, store at –5 to –30°C

3 x 0.9 mL ExpiFectamine 293 Transfection Reagent, store at 2°C to 8°CC5 mL ExpiFectamine 293 Enhancer 1, store at 2°C to 8°CC50 mL ExpiFectamine 293 Met (–) Enhancer 2, store at 2°C to 8°CC100 mL Opti-Plex Complexation Buffer, store at 2°C to 8°CC (protect from light)1 L Expi293 Met (–) Expression Medium, store at 2°C to 8°CC (protect from light)

4°C

Alexa Fluor™ 488 Antibody Labeling Kit comes with 5 vials of reactive dye, sodium bicarbonate, purification resin, spin columns, and collections tubes.Store at 2°C to 8°C, protected from light. Component A may be stored from -20°C to +8°C.

Alexa Fluor™ 532 Antibody Labeling Kit comes with 5 vials of reactive dye, sodium bicarbonate, purification resin, spin columns, and collections tubes.Store at 2°C to 8°C, protected from light. Component A may be stored from -20°C to +8°C.

Alexa Fluor™ 546 Antibody Labeling Kit comes with 5 vials of reactive dye, sodium bicarbonate, purification resin, spin columns, and collections tubes.Store at 2°C to 8°C, protected from light. Component A may be stored from -20°C to +8°C.

Alexa Fluor™ 555 Antibody Labeling Kit comes with 5 vials of reactive dye, sodium bicarbonate, purification resin, spin columns, and collections tubes.Store at 2°C to 8°C, protected from light. Component A may be stored from -20°C to +8°C.

Alexa Fluor™ 568 Antibody Labeling Kit comes with 5 vials of reactive dye, sodium bicarbonate, purification resin, spin columns, and collections tubes.Store at 2°C to 8°C, protected from light. Component A may be stored from -20°C to +8°C.

Alexa Fluor™ 594 Antibody Labeling Kit comes with 5 vials of reactive dye, sodium bicarbonate, purification resin, spin columns, and collections tubes.Store at 2°C to 8°C, protected from light. Component A may be stored from -20°C to +8°C.

Alexa Fluor™ 647 Antibody Labeling Kit comes with 5 vials of reactive dye, sodium bicarbonate, purification resin, spin columns, and collections tubes.Store at 2°C to 8°C, protected from light. Component A may be stored from -20°C to +8°C.

Alexa Fluor™ 680 Antibody Labeling Kit comes with 5 vials of reactive dye, sodium bicarbonate, purification resin, spin columns, and collections tubes.Store at 2°C to 8°C, protected from light. Component A may be stored from -20°C to +8°C.

Alexa Fluor™ 790 Antibody Labeling Kit comes with 5 vials of reactive dye, sodium bicarbonate, purification resin, spin columns, and collections tubes.Store at 2°C to 8°C, protected from light. Component A may be stored from -20°C to +8°C.

Below -10°C

Contains 1 vial (1 mg).Store in freezer (-5 to -30°C) and protect from light.

Contains 1 vial of Pacific Blue™ dye (1 mg).Store in freezer (-5 to -30°C) and protect from light.

Contains 1 vial of Zenon Alexa Fluor 405 mouse IgG1labeling reagent (250 μL), and 1 vial of Zenon blocking reagent (mouse IgG, 250 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon Alexa Fluor 405 rabbit IgG labeling reagent (250 μL), and 1 vial of Zenon blocking reagent (rabbit IgG, 250 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon Alexa Fluor 488 Human IgG labeling reagent (250 μL), and 1 vial of Zenon blocking reagent (human IgG, 250 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon Alexa Fluor 488 mouse IgG1labeling reagent (250 μL), and 1 vial of Zenon blocking reagent (mouse IgG, 250 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon Alexa Fluor 488 mouse IgG2alabeling reagent (250 μL), and 1 vial of Zenon blocking reagent (mouse IgG, 250 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon Alexa Fluor 488 mouse IgG2blabeling reagent (250 μL), and 1 vial of Zenon blocking reagent (mouse IgG, 250 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon Alexa Fluor 488 rabbit IgG labeling reagent (250 μL), and 1 vial of Zenon blocking reagent (rabbit IgG, 250 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon Alexa Fluor 555 mouse IgG1labeling reagent (250 μL), and 1 vial of Zenon blocking reagent (mouse IgG, 250 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon Alexa Fluor 555 rabbit IgG labeling reagent (250 μL), and 1 vial of Zenon blocking reagent (rabbit IgG, 250 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon Alexa Fluor 568 mouse IgG1labeling reagent (250 μL), and 1 vial of Zenon blocking reagent (mouse IgG, 250 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon Alexa Fluor 568 rabbit IgG labeling reagent (250 μL), and 1 vial of Zenon blocking reagent (rabbit IgG, 250 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon Alexa Fluor 594 Human IgG labeling reagent (250 μL), and 1 vial of Zenon blocking reagent (human IgG, 250 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon Alexa Fluor 594 mouse IgG1labeling reagent (250 μL), and 1 vial of Zenon blocking reagent (mouse IgG, 250 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon Alexa Fluor 594 mouse IgG2alabeling reagent (250 μL), and 1 vial of Zenon blocking reagent (mouse IgG, 250 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon Alexa Fluor 594 rabbit IgG labeling reagent (250 μL), and 1 vial of Zenon blocking reagent (rabbit IgG, 250 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon Alexa Fluor 647 Goat IgG labeling reagent (250 μL), and 1 vial of Zenon blocking reagent (rabbit IgG, 250 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon Alexa Fluor 647 Human IgG labeling reagent (250 μL), and 1 vial of Zenon blocking reagent (human IgG, 250 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon Alexa Fluor 647 mouse IgG1labeling reagent (250 μL), and 1 vial of Zenon blocking reagent (mouse IgG, 250 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon Alexa Fluor 647 mouse IgG2alabeling reagent (250 μL), and 1 vial of Zenon blocking reagent (mouse IgG, 250 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon Alexa Fluor 647 mouse IgG2blabeling reagent (250 μL), and 1 vial of Zenon blocking reagent (mouse IgG, 250 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon Alexa Fluor 647 rabbit IgG labeling reagent (250 μL), and 1 vial of Zenon blocking reagent (rabbit IgG, 250 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon Alexa Fluor 700 mouse IgG1labeling reagent (250 μL), and 1 vial of Zenon blocking reagent (mouse IgG, 250 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon Alexa Fluor 750 rabbit IgG labeling reagent (250 μL), and 1 vial of Zenon blocking reagent (rabbit IgG, 250 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon APC Human IgG labeling reagent (125 μL), and 1 vial of Zenon blocking reagent (human IgG, 125 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon APC mouse IgG1labeling reagent (125 μL), and 1 vial of Zenon blocking reagent (mouse IgG, 125 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon APC mouse IgG2alabeling reagent (125 μL), and 1 vial of Zenon blocking reagent (mouse IgG, 125 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon APC rabbit IgG labeling reagent (125 μL), and 1 vial of Zenon blocking reagent (rabbit IgG, 125 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon Biotin-XX mouse IgG1labeling reagent (250 μL), and 1 vial of Zenon blocking reagent (mouse IgG, 250 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon R-PE Human IgG labeling reagent (125 μL), and 1 vial of Zenon blocking reagent (human IgG, 125 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon R-PE mouse IgG1labeling reagent (125 μL), and 1 vial of Zenon blocking reagent (mouse IgG, 125 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon R-PE rabbit IgG labeling reagent (125 μL), and 1 vial of Zenon blocking reagent (rabbit IgG, 125 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 1 vial of Zenon RPE mouse IgG2alabeling reagent (125 μL), and 1 vial of Zenon blocking reagent (mouse IgG, 125 μL).Store in refrigerator (2–8°C) and protect from light.

Contains 5 vials of Pacific Blue™ reactive dye, 1 vial sodium bicarbonate (84 mg), purification resin (10 mL), 5 spin columns, and and 5 collection tubes.Store at 2-8°C, protected from light. Component A may be stored from -20°C to 8°C.

Contains 5 vials of sulfo-SMCC, 5 Zeba Dye & Biotin Removal columns, and BupH™ Phosphate Buffered Saline pack.Store sulfo-SMCC desiccated at –20°C, Zeba Dye and Biotin Removal columns at 2–8°C.

Contains 5 vials of TFP Ester-PEG4-DBCO, 5 Zeba Dye & Biotin Removal columns, anhydrous DMSO, and BupHTM Phosphate Buffered Saline pack.Store TFP Ester-PEG4-DBCO desiccated at –20°C, Zeba Dye and Biotin Removal columns at 2–8°C.

Content: 5 mL of settled resin.Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, between the following temperatures: 2 to 8°C.

DTT is shipped on dry ice and should be stored at -20°C.

EZ-Link NHS-PEG4-Biotin, 8 x 0.5 mgZeba Spin Desalting Columns (7K MWCO), 8 x 0.5 mL20X Phosphate Buffered Saline, 15 mLStore in refrigerator (2–8°C).

FITC, 3 x 50 μg vialsBorate Buffer, 1 mLPurification Resin, 5 mLSpin Columns, 6 eachCollection Tubes, 12 each

Following reconstitution, aliquot and freeze (−20°C). Stock solutions are stable for up to 3 months at −20°C

LanthaScreen™ TR-FRET Labeling Reagents are provided lyophilized. Store at -20°C, desiccated, and protected from light. After reconstitution, terbium lanthanide chelates should be stored on ice and used within the same day.

LESS THAN -65C

Mixed storage conditions (2–8°C and below -20°C)--see manual for details.

Multiple storage requirements

Pacific Orange™ Antibody Labeling Kit comes with 5 vials of reactive dye, sodium bicarbonate, purification resin, spin columns and collections tubes.Store at 2-8°C, protected from light. Component A may be stored from -20 to 8°C.

Premium Grade Sulfo-NHS ester of biotin with an ethyl-1,3-dithioproprionate spacer.Store with desiccant at -20°C.Sufficient to label a total of 1 g of IgG using typical conditions.

Storage: Upon receipt store product at 4°C with desiccant. Product shipped at ambient temperature

Store at -20°C

Store at -20°C or lower and protect from light.

Store at -20°C protected from moisture. Shipped at ambient temperature.

Store at -20°C, dessicate and protect from light.

Store at -20°C.

Store at -20°C. Shipped at ambient temperature.

Store at -5°C to -30°C.

Store at –20°C

Store at –20°C, desiccate, and protect from light.

Store at –20°C.

Store at < 4°C.

Store at ≤ -20°C. Desiccation recommended. Protect material from long-term exposure to light; may be exposed to light for short periods of time

Store at ≤-20°C and desiccated.

Store at ≤-20°C and keep desiccated.

Store at ≤-20°C, desiccate and protect from light.

Store at ≤-20°C, desiccate, and protect from light.

Store at ≤-20°C, desiccated and protect from light.

Store at ≤-20°C, desiccated and protected from light.

Store at ≤-20°C. Desiccation recommended. Protect material from long-term exposure to light; may be exposed to light for short periods of time

Store at 2°C to 8°C. Desiccation recommended. Protect material from long-term exposure to light; may be exposed to light for short periods of time

Store at 2°C to 8°C. Do not freeze.

Store at 2°C to 8°CIMPORTANT! Do not freeze.

Store at 4°C short term. Aliquot and store at -20°C long term. Avoid freeze-thaw cycles.

Store at 4°C.

Store at 4°C. Do not freeze.

Store at room temperature and protect from light.

Store at room temperature in a sealed container to prevent oxidation.

Store at room temperature.

Store between 2 to 25°C

Store desiccated and protected from light in the freezer (-5°C to +30°C).

Store desiccated at -20°C, protect from moisture

Store desiccated at -20°C, protected from light.

Store desiccated at -20°C.

Store desiccated at -20°C. Shipped at ambient temperature.

Store desiccated at -5 to -30°C.

Store desiccated at –20°C

Store desiccated at 4°C.

Store desiccated at 4°C. Product is shipped at ambient temperature.

Store desiccated at 4°C. Shipped at ambient temperature.

Store desiccated at room temperature.

Store in freezer -5°C to -30°C and protect from light.

Store in freezer -5°C to -30°C.

Store in freezer (-5 to -30°C) and protect from light.

Store in freezer (-5 to -30°C).

Store in freezer (-5 to -30°C). Protect from light.

Store in freezer (-5°C to -30°C) and protect from light.

Store in freezer (-5°C to -30°C).

Store in freezer (–5 to –30°C).

Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, between the following temperatures: 2 to 25°C.

Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, between the following temperatures: 2 to 8°C.

Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, between the following temperatures: 20 to 25°C.

Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, but do not store above -20°C.

Store in original container protected from direct sunlight in a dry, cool and well-ventilated area.

Store in original container protected from direct sunlight in a dry, cool, and well-ventilated area from 2–8°C.

Store in refrigerator (2-8 °C).

Store in refrigerator (2–8°C) and protect from light.

Store in refrigerator (2–8°C), desiccate, protect from light, and do not freeze.

Store in refrigerator (2–8°C).

Store in refrigerator (2°C to 8°C) and protect from light

Store in refrigerator (2°C to 8°C) and protect from light.

Store in refrigerator (2°C to 8°C).

Store in refrigerator 2° to 8°C, desiccate, protect from light, and do not freeze.

Store in refrigerator 2°C to 8°C and protect from light.

Store in refrigerator at 2°C to 8°C

Store in the dark at -20°C

Store protected from direct sunlight in a dry, cool, and well-ventilated area.

Store purification resin at 4°C. Shipped at ambient temperature.

Store refrigerated.

Store the DyLight NHS Ester at -20°C. Store all other kit components at 4°C.

Store the entire kit at 2 to 6°C upon receipt

Store the product in desiccated environment at -20°C and avoid from light.

Store the product in desiccated environment at -20°C and avoid from light. Add ddH2O with 0.1% BSA into the vial to have 1 mg/mL stock solution. This reconstituted solution remains stable for 2 months when stored in the presence of 2 mM sodium azide and avoid from light at 4°C. For longer storage, divid the reconstituted solution into single-used aliquots, or add equal volume of glycerol without aliquoting, and avoid from light at -20°C.

Sufficient for 216 samples in microplate format• Phosphate Buffered Saline (20X), 3 mL• DyLight Reporter, 1.3 mL• 1 mM Biocytin Control, 0.1 mLStore at 4°C.

Sufficient For: 10 labeling reactions, each with 1 to 10 mg of antibody• EZ-Link Sulfo-NHS-LC-Biotin, 25 mg• PBS Pack (makes 500 mL), 1 pack• Zeba Spin Desalting Columns (7K MWCO), 5 mL, 10 columns• HABA Solution, 1 mL• Avidin, 10 mgStore biotin and avidin reagents at -20°C. Store remaining kit components at 4°C.

Sufficient For: 10 labeling reactions, each with 1 to 10 mg of antibody• EZ-Link Sulfo-NHS-SS-Biotin, 25 mg• PBS Pack (makes 500 mL), 1 pack• Zeba Spin Desalting Columns (7K MWCO), 5 mL, 10 columns• HABA Solution, 1 mL• Avidin, 10 mgStore avidin at -20°C. Store biotin reagent desiccated at 4°C. Store remaining kit components at 4°C.

Sufficient For: 10 purifications, each of 0.5 to 50 mg of enzyme-conjugated antibodyIDA Agarose Column, 2 mL, 1 columnPolyacrylamide Desalting Column, 10 mL, 1 columnColumn Activator Buffer, 25 mLElution Buffer, 35 mLTBS Packs (each makes 500 mL), 2 packsPBS Pack (makes 500 mL), 1 packActivity Preservation Solution, 1 mLStore kit at 4°C.

Sufficient For: 5 complete duplex (5 x 2-way) experiments• TMT0 Label Reagent, 5 x 0.8 mg• TMT2-126 Label Reagent, 5 x 0.8 mg• TMT2-127 Label Reagent, 5 x 0.8 mg• Dissolution Buffer (1M triethyl ammonium bicarbonate), 5 mL• Denaturing Reagent (10% SDS), 1 mL• Reducing Reagent (0.5M TCEP), 1 mL• Iodoacetamide, 12 x 9 mg• Quenching Reagent (50% hydroxylamine), 1 mL• Trypsin, 2 x 20 μg• Trypsin Storage Solution, 250 μL• Albumin, Bovine, 2.5 mgStore at -20°C

Sufficient For: 5 conjugations, each with 0.3 mg antibody (IgG)Activated Peroxidase, 5 mgConjugation Buffer, 50 mLLysine, 250 mgProtein A/G Column, 0.5 mLGentle Ag/Ab Binding Buffer, 200 mLGentle Ag/Ab Elution Buffer, 200 mLStore activated peroxidase at -20°C. Store other components at 4°C.

Sufficient For: 8 label transfer reactions for subsequent western blot analysis• Sulfo-SBED, 8 x 1 mg• PBS pack (makes 500 mL), 1 pack• Label Transfer Buffer (20X), 200 mL• Streptavidin-HRP Conjugate, 0.1 mg• Dithiothreitol (DTT), 8 x 7.7 mg• Slide-A-Lyzer MINI Dialysis Devices Plus Float, 10K MWCO, 10-device kitStore at 4°C

Sufficient For: 8 labeling reactions, each with 0.05–0.2 mg of antibody• EZ-Link NHS-PEG4-Biotin, 8 x 2 mg• PBS Pack (makes 500 mL), 1 pack• Zeba Spin Desalting Columns (7K MWCO), 2 mL, 10 columnsStore microtubes of biotin reagent at -20°C. Store PBS at room temperature. Store desalting column at 4°C. Shipped at ambient temperature.

Sufficient For: 8 labeling reactions, each with 0.05–0.2 mg of antibody• EZ-Link Sulfo-NHS-Biotin, 8 x 1 mg• PBS Pack (makes 500 mL), 1 pack• Zeba Spin Desalting Columns (7K MWCO), 2 mL, 10 columnsStore biotin reagent at -20°C. Store remaining kit components at 4°C.

Sufficient For: 8 labeling reactions, each with 0.05–0.2 mg of antibody• EZ-Link Sulfo-NHS-LC-Biotin, 8 x 1 mg• PBS Pack (makes 500 mL), 1 pack• Zeba Spin Desalting Columns (7K MWCO), 2 mL, 10 columnsStore biotin reagent at -20°C. Store remaining kit components at 4°C.

Sufficient For: 8 labeling reactions, each with 0.05–0.2 mg of antibody• EZ-Link Sulfo-NHS-SS-Biotin, 8 x 1 mg• PBS Pack (makes 500 mL), 1 pack• Zeba Spin Desalting Columns (7K MWCO), 2 mL, 10 columnsStore biotin reagent at -20°C. Store remaining kit components at 4°C.

Sufficient For: 8 labeling reactions, each with 0.1 to 1 mg of antibody• Ni-NTA Spin Columns, 0.2 mL, 8 columns• PBS pack (makes 500 mL), 1 pack• NHS-PEG4-Biotin, 8 x 2 mg• Imidazole Stock Solution (4M), 5 mL• Collection Tubes (2mL), 30 tubesStore at 4°C.

Sufficient For: 8 labeling reactions, each with 1 to 10 mg of antibody• EZ-Link NHS-PEG4-Biotin, 8 x 2 mg• PBS Pack (makes 500mL), 1 pack• Zeba Spin Desalting Columns (7K MWCO), 5 mL, 10 columns• HABA Solution, 1 mL• Avidin, 10mgStore avidin and microtubes of biotin reagent at -20°C. Store PBS at room temperature. Store remaining kit components at 4°C.

Sufficient for: Eight 10-plex (8 x 10-way) experiments• TMT10-126 Label Reagent, 8 x 40 μg• TMT10-127N Label Reagent, 8 x 40 μg• TMT10-127C Label Reagent, 8 x 40 μg• TMT10-128N Label Reagent, 8 x 40 μg• TMT10-128C Label Reagent, 8 x 40 μg• TMT10-129N Label Reagent, 8 x 40 μg• TMT10-129C Label Reagent, 8 x 40 μg• TMT10-130N Label Reagent, 8 x 40 μg• TMT10-130C Label Reagent, 8 x 40 μg• TMT10-131 Label Reagent, 8 x 40 μgStore at -20°C.

Sufficient for: Eight 11-plex (8 x 11-way) experiments• TMT11-126 Label Reagent, 8 x 40 μg• TMT11-127N Label Reagent, 8 x 40 μg• TMT11-127C Label Reagent, 8 x 40 μg• TMT11-128N Label Reagent, 8 x 40 μg• TMT11-128C Label Reagent, 8 x 40 μg• TMT11-129N Label Reagent, 8 x 40 μg• TMT11-129C Label Reagent, 8 x 40 μg• TMT11-130N Label Reagent, 8 x 40 μg• TMT11-130C Label Reagent, 8 x 40 μg• TMT11-131N Label Reagent, 8 x 40 μg• TMT11-131C Label Reagent, 8 x 40 μgStore at -20°C.

Sufficient for: Five complete sixplex (5 x 6-way) experiments• TMT0 Label Reagent, 5 x 0.8 mg• TMT6-126 Label Reagent, 5 x 0.8 mg• TMT6-127 Label Reagent, 5 x 0.8 mg• TMT6-128 Label Reagent, 5 x 0.8 mg• TMT6-129 Label Reagent, 5 x 0.8 mg• TMT6-130 Label Reagent, 5 x 0.8 mg• TMT6-131 Label Reagent, 5 x 0.8 mg• Dissolution Buffer (1M triethyl ammonium bicarbonate), 5 mL• Denaturing Reagent (10% SDS), 1 mL• Reducing Reagent (0.5 M TCEP), 1 mL• Iodoacetamide, 12 x 9 mg• Quenching Reagent (50% hydroxylamine), 1 mL• Trypsin, 5 x 20 μg• Trypsin Storage Solution, 250 μL• Albumin, Bovine, 2.5 mgStore at -20°C.

Sufficient for: Five duplex (5 x 2-way) experiments• TMT0 Label Reagent, 5 x 0.8 mg• TMT6-127 Label Reagent, 5 x 0.8 mgStore at –20°C.

Sufficient for: Five sixplex (5 x 6-way) experiments• aminoxyTMT6-126 Label Reagent, 5 x 0.2 mg• aminoxyTMT6-127 Label Reagent, 5 x 0.2 mg• aminoxyTMT6-128 Label Reagent, 5 x 0.2 mg• aminoxyTMT6-129 Label Reagent, 5 x 0.2 mg• aminoxyTMT6-130 Label Reagent, 5 x 0.2 mg• aminoxyTMT6-131 Label Reagent, 5 x 0.2 mgStore at –20°C.

Sufficient for: Five sixplex (5 x 6-way) experiments• iodoTMT6-126 Label Reagent, 5 x 0.2 mg• iodoTMT6-127 Label Reagent, 5 x 0.2 mg• iodoTMT6-128 Label Reagent, 5 x 0.2 mg• iodoTMT6-129 Label Reagent, 5 x 0.2 mg• iodoTMT6-130 Label Reagent, 5 x 0.2 mg• iodoTMT6-131 Label Reagent, 5 x 0.2 mgStore at –20°C.

Sufficient for: Five sixplex (5 x 6-way) experiments• TMT6-126 Label Reagent, 5 x 0.8 mg• TMT6-127 Label Reagent, 5 x 0.8 mg• TMT6-128 Label Reagent, 5 x 0.8 mg• TMT6-129 Label Reagent, 5 x 0.8 mg• TMT6-130 Label Reagent, 5 x 0.8 mg• TMT6-131 Label Reagent, 5 x 0.8 mgStore at –20°C.

Sufficient for: Four 18-plex (4 x 18-way) experiments• TMTpro-126 Label Reagent, 4 x 50 μg• TMTpro-127 N Label Reagent, 4 x 50 μg• TMTpro-127 C Label Reagent, 4 x 50 μg• TMTpro-128 N Label Reagent, 4 x 50 μg• TMTpro-128 C Label Reagent, 4 x 50 μg• TMTpro-129 N Label Reagent, 4 x 50 μg• TMTpro-129 C Label Reagent, 4 x 50 μg• TMTpro-130 N Label Reagent, 4 x 50 μg• TMTpro-130 C Label Reagent, 4 x 50 μg• TMTpro-131 N Label Reagent, 4 x 50 μg• TMTpro-131 C Label Reagent, 4 x 50 μg• TMTpro-132 N Label Reagent, 4 x 50 μg• TMTpro-132 C Label Reagent, 4 x 50 μg• TMTpro-133 N Label Reagent, 4 x 50 μg• TMTpro-133 C Label Reagent, 4 x 50 μg• TMTpro-134 N Label Reagent, 4 x 50 μg• TMTpro-134 C Label Reagent, 4 x 50 μg• TMTpro-135 N Label Reagent, 4 x 50 μgStore at -20°C.

Sufficient For: Labeling and purifying 3 x 1 mg (2 mg/mL) of IgG or other proteinsNHS Fluorescein, 3 x 50 μg vialsBorate Buffer, 1 mLPurification Resin, 5 mLSpin Columns, 6 eachCollection Tubes, 12 eachStore NHS-Fluorescein at -20°C. Store other kit components at 4°C.

Sufficient for: One 10-plex (1 x 10-way) experiment• TMT10-126 Label Reagent, 1 x 0.8 mg• TMT10-127N Label Reagent, 1 x 0.8 mg• TMT10-127C Label Reagent, 1 x 0.8 mg• TMT10-128N Label Reagent, 1 x 0.8 mg• TMT10-128C Label Reagent, 1 x 0.8 mg• TMT10-129N Label Reagent, 1 x 0.8 mg• TMT10-129C Label Reagent, 1 x 0.8 mg• TMT10-130N Label Reagent, 1 x 0.8 mg• TMT10-130C Label Reagent, 1 x 0.8 mg• TMT10-131 Label Reagent, 1 x 0.8 mgStore at –20°C.

Sufficient For: One conjugation with two purified proteins (up to 5 mg each)• Sulfo-SMCC Crosslinking Agent, 2 mg• Activation/Conjugation Buffer (10X), 20 mL• PBS packs (each makes 500mL), 2 packs• 2-Mercaptoethylamine-HCl, 6 mg• Immobilized-Reductant, 0.2 mL• SATA, 2 mg• Dimethylformamide (DMF), 1 mL• Hydroxylamine-HCl, 5 mg• Dextran Desalting Column, 2 x 10 mL• Column Extender, 2 ea.• Cysteine-HCl, 20 mg• Ellman's Reagent, 2 mgStore at 4°C.

Sufficient For: One modification experiment with 0.5 to 5 mg of purified protein• SATA, 2 mg• Hydroxylamine·HCl, 5 mg• Conjugation Buffer Stock (10X), 20 mL• PBS pack (makes 500 mL), 1 pack• Dimethylformamide (DMF), 1 mL• Dextran Desalting Column, 1 x 5 mL• Column Extender, 1• Ellman's Reagent (DTNB), 2 mg• Cysteine·HCl, 20 mgStore at 4°C.

Sufficient for: One sixplex (1 x 6-way) experiment• aminoxyTMT6-126 Label Reagent, 1 x 0.2 mg• aminoxyTMT6-127 Label Reagent, 1 x 0.2 mg• aminoxyTMT6-128 Label Reagent, 1 x 0.2 mg• aminoxyTMT6-129 Label Reagent, 1 x 0.2 mg• aminoxyTMT6-130 Label Reagent, 1 x 0.2 mg• aminoxyTMT6-131 Label Reagent, 1 x 0.2 mgStore at –20°C.

Sufficient for: One sixplex (1 x 6-way) experiment• TMT6-126 Label Reagent, 1 x 0.8 mg• TMT6-127 Label Reagent, 1 x 0.8 mg• TMT6-128 Label Reagent, 1 x 0.8 mg• TMT6-129 Label Reagent, 1 x 0.8 mg• TMT6-130 Label Reagent, 1 x 0.8 mg• TMT6-131 Label Reagent, 1 x 0.8 mgStore at –20°C.

Sufficient for: Six 10-plex (6 x 10-way) experiments• TMT10-126 Label Reagent, 1 x 5 mg• TMT10-127N Label Reagent, 1 x 5 mg• TMT10-127C Label Reagent, 1 x 5 mg• TMT10-128N Label Reagent, 1 x 5 mg• TMT10-128C Label Reagent, 1 x 5 mg• TMT10-129N Label Reagent, 1 x 5 mg• TMT10-129C Label Reagent, 1 x 5 mg• TMT10-130N Label Reagent, 1 x 5 mg• TMT10-130C Label Reagent, 1 x 5 mg• TMT10-131 Label Reagent, 1 x 5 mgStore at –20°C.

Sufficient For: Testing biotinylation of 12 protein samples• HABA-Avidin Premix, 24 tubes• Biotinylated Horseradish Peroxidase, 5 mgStore at 4°C.

Sufficient for: Three 10-plex (3 x 10-way) experiments• TMT10-126 Label Reagent, 3 x 0.8 mg• TMT10-127N Label Reagent, 3 x 0.8 mg• TMT10-127C Label Reagent, 3 x 0.8 mg• TMT10-128N Label Reagent, 3 x 0.8 mg• TMT10-128C Label Reagent, 3 x 0.8 mg• TMT10-129N Label Reagent, 3 x 0.8 mg• TMT10-129C Label Reagent, 3 x 0.8 mg• TMT10-130N Label Reagent, 3 x 0.8 mg• TMT10-130C Label Reagent, 3 x 0.8 mg• TMT10-131 Label Reagent, 3 x 0.8 mg• Dissolution Buffer (1M triethyl ammonium bicarbonate), 5 mL• Denaturing Reagent (10% SDS), 1 mL• Reducing Reagent (0.5M TCEP), 1 mL• Iodoacetamide, 12 x 9 mg• Quenching Reagent (50% hydroxylamine), 1 mL• Pierce Trypsin Protease, MS Grade, 5 x 20 μg• Trypsin Storage Solution, 250 μL• Albumin, Bovine, 2.5 mgStore at –20°C.

Sufficient for: Three 10-plex (3 x 10-way) experiments• TMT10-126 Label Reagent, 3 x 0.8 mg• TMT10-127N Label Reagent, 3 x 0.8 mg• TMT10-127C Label Reagent, 3 x 0.8 mg• TMT10-128N Label Reagent, 3 x 0.8 mg• TMT10-128C Label Reagent, 3 x 0.8 mg• TMT10-129N Label Reagent, 3 x 0.8 mg• TMT10-129C Label Reagent, 3 x 0.8 mg• TMT10-130N Label Reagent, 3 x 0.8 mg• TMT10-130C Label Reagent, 3 x 0.8 mg• TMT10-131 Label Reagent, 3 x 0.8 mgStore at –20°C.

Sufficient for: Twelve sixplex (12 x 6-way) experiments• TMT6-126 Label Reagent, 2 x 5 mg• TMT6-127 Label Reagent, 2 x 5 mg• TMT6-128 Label Reagent, 2 x 5 mg• TMT6-129 Label Reagent, 2 x 5 mg• TMT6-130 Label Reagent, 2 x 5 mg• TMT6-131 Label Reagent, 2 x 5 mgStore at –20°C

Sufficient for: Two sixplex (2 x 6-way) experiments• TMT6-126 Label Reagent, 2 x 0.8 mg• TMT6-127 Label Reagent, 2 x 0.8 mg• TMT6-128 Label Reagent, 2 x 0.8 mg• TMT6-129 Label Reagent, 2 x 0.8 mg• TMT6-130 Label Reagent, 2 x 0.8 mg• TMT6-131 Label Reagent, 2 x 0.8 mgStore at –20°C.

This kit contains: Click-iT™ OPP Reagent, Alexa Fluor™ dye picolyl azide, Click-iT™ OPP Reaction Buffer, Copper Protectant, Click-iT™ Reaction Buffer Additive, Click-iT™ Reaction Rise Buffer, and NuclearMask™ Blue Stain.

This kit contains: Click-iT™ OPP Reagent, Alexa Fluor™ dye picolyl azide, Click-iT™ OPP Reaction Buffer, Copper Protectant, Click-iT™ Reaction Buffer Additive, Click-iT™ Reaction Rise Buffer, and NuclearMask™ Blue Stain. Store at 2° to 8°C. Desiccate and protect from light.

TMTpro-135CD Label Reagent, 1 x 5 mgStore below -20°C.

Upon receipt store all products at 4°C. Product shipped with an ice pack.

Upon receipt store at -20°C protected from light and moisture.

Upon receipt store at -20°C protected from light.

Upon receipt store at -20°C protected from moisture.

Upon receipt store at -20°C protected from moisture. Products shipped at ambient temperature.

Upon receipt store at -20°C.

Upon receipt store at -20°C. Product is shipped at ambient temperature.

Upon receipt store at 4°C protected from light.

Upon receipt store at 4°C protected from moisture.

Upon receipt store at 4°C.

Upon receipt store at 4°C. Do not freeze.

Upon receipt store at room temperature in sealed container to prevent oxidation. Product shipped at ambient temperature.

Upon receipt store at room temperature protected from moisture. After opening barrier pouch, close the interior resealable bag containing the tubes with the yellow closures and desiccant.

Upon receipt store at room temperature.

Upon receipt store desiccated at -20° C. Product is shipped at ambient temperature.

Upon receipt store desiccated at -20°C.

Upon receipt store desiccated at -20°C. Product is shipped at ambient temperature.

Upon receipt store desiccated at -20°C. Product shipped at ambient temperature.

Upon receipt store desiccated at 2 to 8°C.

Upon receipt store desiccated at 4 to 8°C.

Upon receipt store desiccated at 4°C.

Upon receipt store desiccated at 4°C. Product is shipped at ambient temperature.

Upon receipt store desiccated at room temperature. Product shipped at ambient temperature.

Upon receipt store product at -20°C protected from moisture. Product is shipped at ambient temperature.

Upon receipt store product at 4-8°C. Product is shipped at ambient temperature.

Upon receipt store product at 4°C protected from light and moisture.

Upon receipt store product at room temperature in sealed container to prevent oxidation. Product is shipped at ambient temperature.

Upon receipt store product at room temperature. Product shipped at ambient temperature.

Upon receipt store product desiccated at 4°C. Avoid exposing beads to moisture or reducing agents. Product is shipped at ambient temperature.

Upon receipt, store product at 4°C.

Vivid™ CYP450 Screening kits include Vivid™ CYP450 Fluorogenic substrates, BACULOSOMES™ CYP450 reagents, fluorescent standards, and an NADPH-regeneration system. Vivid™ CYP450 Fluorogenic substrates are also available separately. Store reaction buffers at +4°C or room temperature. Store BACULOSOMES™, the NADPH-regeneration system, and NADP+ at -80°C. Store the Vivid™ substrates and standards at +4°C, protected from light. (For long-term storage, resuspend in organic solvent and keep at -20°C.)

ZOOM™ IEF Fractionator• ZOOM™ Disks, one pack of each pHZOOM™ Reagents• Urea• Thiourea• CHAPS• Carrier ampholytes pH 3-10• Anode buffers• Bathode buffersStore all components at 4°C.

MS System Performance

Peptide labeling

Peptide Labeling

Peptide labeling and quantitation

Peptide Labeling and quantitation

Peptide Labeling and Quantitation

Peptide quantitation

Protein Labeling

Alexa Fluor™

Alexa Fluor™, Click-iT™

Alexa Fluor™, Molecular Probes™

Alexa Fluor™, SAIVI™

Alexa Fluor™, SiteClick™

aminoxyTMTsixplex™

BODIPY™

Bond-Breaker™

CASCADE BLUE™

Click-iT™

Click-iT™, Molecular Probes™

CyDye™

DSB-X™

DyLight™

Expi293F™

EZ-Link™

EZ-Link™ No-Weigh™

EZ-Link™, No-Weigh™

FluoReporter™

FluoroPure™

GlycoLink™

iodoTMTsixplex™

iodoTMTzero™

ITK™, Molecular Probes™, Qdot™

ITK™, Qdot™

LanthaScreen™

Molecular Probes™

Molecular Probes™, Oregon Green™

Molecular Probes™, Pacific Blue™

MS Reagents

No-Weigh™

No-Weigh™, Pierce™

NovaFluor™

Oregon Green™

Pacific Blue™

Pacific Orange™

pHrodo™

pHrodo™, SiteClick™

Pierce

Pierce™

Qdot™, SiteClick™

QSY™

Rhodamine Green™

Rhodamine Red™

SiteClick™

Texas Red™

TMT10plex™

TMTduplex™

TMTpro™

TMTsixplex™

TMT™

TMTzero™

VIVID™

WELQut

Zenon™

ZOOM™

Cell Lysate

Peptides