Thermo Scientific™ MaxQ™ 7000 Water Bath Orbital Shaker

Description

• Combine a controlled water bath temperature and orbital shaking motion with the Thermo Scientific™ MaxQ™ 7000 Water Bath Orbital Shaker
• These benchtop orbital water bath shakers easily hold large gel trays in an oversized bath chamber and contain an easy-access drain system located in the front of the cabinet
• They are ideal for cell culture, solubility studies, extraction procedures, diagnostic tests and many other applications
• Features: The MaxQ 7000 is easy to drain and disinfect with the front-access drain system and quick disconnect Twin baffles minimize splashing and turbulence in the chamber Choice of stainless-steel or Plexiglas™ cover minimizes evaporation and heat loss Temperature range of 5°C above ambient to 90°C with use of stainless-steel covers Monitor and control chamber temperature range with ±0.2°C accuracy at 37°C in flask View speed, time and tesmperature simultaneously on three separate displays Triple eccentric drive handles heavy loads, uniform agitation and continuous 24-hr
• operation, even at high speeds Easy access drain system with quick disconnect is located in the front of the cabinet for convenience in draining and disinfecting the syste Low-level water alarm alerts operator Optional cooling coil extends the range of applications to near and below ambient Holds 11 × 13″ platform which must be ordered separately Analog Model: Variable speed control from 40 to 400rpm controlled by a rotary dial monitored accurately by a traditional tachometer Integrated tachometer monitors and displays speed in rpm to guarantee an accurate setting Continuous mode or set timer from 1 to 60 min
• Digital Model: Speed range: 15 to 500rpm, ±1rpm Continuous and timed operation from 0.1 hr
• up to 999 hr
• or 0.1 min
• to 999 min
• Shaker shutdown and audible/visual alarms signal if unit operates ±10% of set speed, preventing shaker from walking Visual/audible signals alert to temperature deviations and low water levels; heat turns off if temperature deviates ±1°C of setpoint User-adjustable speed calibration can be performed using a digital handheld tachometer Unbalanced load sensor stops platform motion when excess vibration is detected; visual/audible alarms signal until condition is corrected Soft-start feature eliminates sudden starts and stops, splashing of vessel contents or wetting of flask closure Solid-state DC brushless motor is maintenance-free Retains parameters during power failure and restarts automatically after power is restored Ordering Information: For a complete system, order platforms and clamps (sold separately)
• Requires: Universal Platform (without clamps), or Dedicated Platform (with pre-installed clamps) Clamps Recommended for: Bacterial suspensions Cell culture Diagnostic tests Extraction procedures General mixing Hybridization Solubility studies Staining and destaining Washing procedures