Eppendorf™ I-24R Refrigerating/Incubator Shakers

Description

• Refrigeration available on select models
• Operating Features Tactile keypad for setting speed, temperature or time High-visibility 3/8 in
• digital LED display with panel lights indicating active mode and function Microprocessor with self-correcting Proportional/Integral feedback precisely regulates speed, temperature and run time Feedback control maintains desired operating settings if conditions deviate from setpoints Timer: 0.1 to 99.9 hours or continuous operation Auto Restart retains current setting in memory Design Features Triple-eccentric Gyrotory™ drive delivers years of dependable service Heavy-duty DC solid-state brushless motor with nine precision-fitted ball bearings Counterbalanced mechanism delivers smooth, uniform motion Soft start-up prevents spillage from flasks and tubes Cast-iron base Safety Features Acceleration/deceleration circuit prevents sudden starts and stops Speed-limiting sensor slows agitation to safe speed when overload or imbalance is detected Cutout switch stops agitation when lid is opened Thermostat fail-safe shuts off heater if high temperature limit is exceeded Audible/visual alarms alert operator to expired time and to deviations from temperature (±0.1°C) and speed (±5rpm) setpoints Benchtop Model I-24 Accommodates flasks up to 2800mL Shaking speed range: 25 to 500rpm with ±1rpm control Circular shaking motion of 0.75 in
• dia
• (19mm) or 1.75 in
• (2.54cm) Incubating or Incubating/Refrigerated models Programmable timer: 0.1 to 99.9 hours Large-capacity blower ensures uniform temperature throughout the chamber Requires 18 × 18 in
• platform (order separately) Model I-2500 Accepts flasks up to 6L Circular shaking orbit of 1 in
• (25.4mm) powered by 1/8hp motor Lid with 11 × 17 in
• (28 × 43cm) window Foot pedal opens lid Model I-2500KC Identical to Model I2500, but with refrigeration Temperature range: 15° below ambient (with a minimum setpoint of 4°C) to 60°C Order Info All accessories (platforms, racks, trays, and clamps) sold separately
• Certifications UL listed
• CSA approved
• CE marked
• Warranty and Services Two years on parts and labor