Heidolph Stand Alone Autoclave

Description

• Designed to provide high quality, repeatable performance and accountability for a wide range of applications used in modern laboratories For use with Agar preparation as well as the sterilization of liquids, pipettes, glass, instruments, and biohazards with various cooling options Successfully meets the challenges in today's laboratories with a flexible range of features and a sophisticated control system Equipped with a vacuum pump, and a steam generator for sterilization and complete drying of samples The Water Saving (WS) feature allows the autoclave to run without plumbing A highly efficient water recycling system consumes only 5 liters of tap water per day Can be operated as a stationary sterilizer connected to building utilities for distilled water, tap water, drain and electricity Standard Plug and Play option offers the ability to operate only with an electric power connection Narrow Design fits through standard doorways and the minimal footprint does not require a lot of space Sleep Mode allows users to set time to switch sterilizer to minimum energy consumption Low Rate Cycle can be utilized when electrical power costs are low, like after work hours, by setting a delayed start time Double locking safety device prevents door from opening while chamber is pressurized Control lock-out switch prevents starting a cycle if door is not properly locked Control system protection prevents door from opening at high pressure and temperature Immediate Steam (G) and Efficient Air Removal (PV) Steam generator in combination with vacuum (PV G) for complete drying PID (Proportional Integral Differential) pressure control Built-in Memory stores the last 200 cycles Two flexible, independent PT100 temperature sensors prevent boil over of liquids and explosions of bottles Multi-color display for easier reading, indicates stage of the cycle Highly efficient drying is achieved by uniformly heating the chamber wall of the benchtop or vertical autoclave through a coiled pipe Post vacuum stage reduces the boiling point to speed up drying which results in fast and complete drying Guarantees that even the most difficult loads will dry such as textiles, porous loads, hollow instruments, and tips The vacuum pump can also be used for fractioned, pre-vacuum air removal to eliminate air pockets from all load types and maximize efficient steam penetration throughout the entire load