Millipak® Filter

Description

• General description: Millipak® membrane products are designed for routine filtration applications in the laboratory. Millipak® filters are best-in-class proven products used in lab water purification systems to provide particulate-free and bacteria-free water to benefit the stringent requirements of scientific applications.
• Application: Purified water filtered through a Millipak® 40 filter can be used for any laboratory work where water free of bacteria and/or particulates is needed.
• Features and Benefits: Millipak® membrane filters are made with Durapore® PVDF membranes, providing high flow rates and throughputs, low extractable and broad chemical compatibility.The membrane is supported by a rigid plastic disc with channels that ensures high water flow and resistance to pressure variations without the risk of membrane rupture.Millipak® membrane filters use a unique, clean stacked disc design, allowing minimal hold-up volume and particle shedding.Connect to the outlet of the water delivery point, such as the PODs of Milli-Q® water purification systems.The protective bell protects against intrusion of airborne bacteria contamination during dispensing.Care-free maintenance: the filter is easily fitted and replaced.
• Other Notes: These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
• Preparation Note: This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
• Analysis Note: Bacterial RetentionSamples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
• Legal Information: ASTM is a registered trademark of American Society for Testing and Materials