A-004-M

Poly-ʟ-Ornithine

synthetic, liquid, 0.1 mg/mL, suitable for cell culture

Manufacturer: Sigma Aldrich

Synonym(S): Poly-L-Ornithine Solution (0.01%), A-004-M, Sigma-Aldrich

Select a Size

Pack Size SKU Availability Price
100 ML A-004-M-100-ML In Stock ₹ 14,350.00

A-004-M - 100 ML

₹ 14,350.00

In Stock

Quantity

1

Base Price: ₹ 14,350.00

GST (18%): ₹ 2,583.00

Total Price: ₹ 16,933.00

product name

Poly-L-Ornithine Solution (0.01%),

needle size

2.0 mm

Quality Level

100

sterility

sterile

form

liquid

mol wt

Mw 78000 Da

manufacturer/tradename

NovaSeptum®

concentration

0.01 % (w/v)0.1 mg/mL

technique(s)

cell attachment: suitablecell culture | mammalian: suitable

Related Products

Img

Sigma Aldrich

A-005-M

synthetic, liquid, 0.1 mg/mL, suit...

Img

Sigma Aldrich

P4707

synthetic, liquid, 0.01%, suitable ...

Img

Sigma Aldrich

P4957

synthetic, mol wt 30,000-70,000, li...

Img

Sigma Aldrich

F0895

from human plasma, liquid, 1 mg/mL,...

Img

Sigma Aldrich

ECM675

--

Img

Sigma Aldrich

P9404

suitable for cell culture, Mol wt ...

Img

Sigma Aldrich

L9037

98.5-101.5% dry basis, suitable for...

Img

Sigma Aldrich

P9620

Ready Made Solution, from Streptomy...

Description

  • General description: Research Category: Stem Cell Research Research Sub Category: Adhesion (CAMs)
  • Application: Poly-L-Ornithine Solution (0.01%) has been used to coat:glass-bottom plates for cell plating in a research study investigating the localization of cMET in MDA-MB-468 cells using confocal microscopy[1]culture dishes for adult human neural stem cells (ahNSCs) primary culture[2]6-well plates for induced pluripotent stem cells (iPSCs) culture and neuronal differentiation[3]
  • Quality: Solution is clear with no particulates present. Solution is sterile and suitable for cell culture applications.
  • Physical form: Product is presented in sterile water at 0.01% w/v (0.1mg/ml). Product is filtered through a 0.2 micron filter before freezing.
  • Preparation Note: 1. Thaw Poly-L-Ornithine solution at room temperature. 2. Dilute Poly-L-Ornithine solution to the desired concentration in sterile water. 3. Fully coat the cell culture surface with diluted Poly-L-Ornithine solution. Use 5 mL volume for 6-cm plates and 10 mL volume for 10-cm plates and T75 flasks. 4. Allow the cell culture vessel to sit at room temperature overnight. 5. Aspirate the Poly-L-Ornithine solution the following day and rinse the vessel with sterile water followed by coating with desired ECM protein. Optimal coating concentrations must be determined by the end user. Typical coating concentrations range from 10ug/ml to 100ug/ml based on cell type and application.
  • Storage and Stability: Store at -20°C for up to 4 months from date of receipt. Avoid multiple freeze thaw cycles to maintain product integrity.
  • Legal Information: NOVASEPTUM is a registered trademark of Merck KGaA, Darmstadt, Germany
  • Disclaimer: Unless otherwise stated in our catalog or other company documentation accompanying the product(s), our products are intended for research use only and are not to be used for any other purpose, which includes but is not limited to, unauthorized commercial uses, in vitro diagnostic uses, ex vivo or in vivo therapeutic uses or any type of consumption or application to humans or animals.

SAFETY INFORMATION

WGK

WGK 1

Flash Point(F)

Not applicable

Flash Point(C)

Not applicable

Compare Similar Items

Show Difference

Img

Sigma Aldrich

A-004-M

synthetic, liquid, 0.1 mg/mL, suita...


product name:
Poly-L-Ornithine Solution (0.01%),

needle size:
2.0 mm

Quality Level:
100

sterility:
sterile

form:
liquid

mol wt:
Mw 78000 Da

manufacturer/tradename:
NovaSeptum®

concentration:
0.01 % (w/v)0.1 mg/mL

technique(s):
cell attachment: suitablecell culture | mammalian: suitable

Img

Sigma Aldrich

A-005-M

synthetic, liquid, 0.1 mg/mL, suit...


product name:
Poly-L-Lysine Solution, 0.01%

needle size:
2.0 mm

Quality Level:
100

sterility:
sterile

form:
liquid

mol wt:
Mw 84000 Da

manufacturer/tradename:
NovaSeptum®

concentration:
0.01 % (w/v)0.1 mg/mL

technique(s):
cell attachment: suitablecell culture | mammalian: suitable

Img

Supelco

A-054

in H2O (varied conc.), ampule of 3 ...


product name:
__

needle size:
__

Quality Level:
300

sterility:
__

form:
liquid

mol wt:
__

manufacturer/tradename:
Cerilliant®

concentration:
in H2O (varied conc.)

technique(s):
gas chromatography (GC): suitableliquid chromatography (LC): suitable

Img

Supelco

A-057

500 μg/mL each component in H2O, am...


product name:
__

needle size:
__

Quality Level:
300

sterility:
__

form:
liquid

mol wt:
__

manufacturer/tradename:
Cerilliant®

concentration:
500 μg/mL each component in H2O

technique(s):
gas chromatography (GC): suitableliquid chromatography (LC): suitable