SLFH1000N
Millex® hydrophobic PTFE syringe filter
Manufacturer: Millipore
Synonym(S): Millex-FH Filter Unit
Select a Size
| Pack Size | SKU | Availability | Price |
|---|---|---|---|
| 1000 PKG | SLFH1000N-1000-PKG | In Stock | ₹ 4,51,029.99 |
SLFH1000N - 1000 PKG
In Stock
Quantity
1
Base Price: ₹ 4,51,029.99
GST (18%): ₹ 81,185.398
Total Price: ₹ 5,32,215.388
material
PTFE membranePVC housing
Quality Level
600
sterility
non-sterile
feature
FDA registered hydrophobic
parameter
>1.5 mL/min air flow rate at 1 psi>75 mL/min flow rate at 10 psi (methanol)45 °C max. temp. (113 °F)75 psi max. pressure
technique(s)
gas filtration: suitable
diam.
25 mm
filtration area
4 cm2
housing diam.
29 mm
inlet to outlet H
25 mm
Related Products
Description
- General description: Millex®FH will remove by filtration, particles and microorganisms that are larger than the filter’s rated pore size.
- Application: Primarily used in vent applications for the protection of medical equipment that interface with biological agents.
- Features and Benefits: Single-use onlyNon-sterileNon-toxic and non-pyrogenicBidirectionally supportedFDA registered
- Legal Information: Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Compare Similar Items
Show Difference
material: PTFE membranePVC housing
Quality Level: 600
sterility: non-sterile
feature: FDA registered hydrophobic
parameter: >1.5 mL/min air flow rate at 1 psi>75 mL/min flow rate at 10 psi (methanol)45 °C max. temp. (113 °F)75 psi max. pressure
technique(s): gas filtration: suitable
diam.: 25 mm
filtration area: 4 cm2
housing diam.: 29 mm
inlet to outlet H: 25 mm
material:
PTFE membranePVC housing
Quality Level:
600
sterility:
non-sterile
feature:
FDA registered hydrophobic
parameter:
>1.5 mL/min air flow rate at 1 psi>75 mL/min flow rate at 10 psi (methanol)45 °C max. temp. (113 °F)75 psi max. pressure
technique(s):
gas filtration: suitable
diam.:
25 mm
filtration area:
4 cm2
housing diam.:
29 mm
inlet to outlet H:
25 mm
material: __
Quality Level: __
sterility: __
feature: __
parameter: __
technique(s): __
diam.: __
filtration area: __
housing diam.: __
inlet to outlet H: __
material:
__
Quality Level:
__
sterility:
__
feature:
__
parameter:
__
technique(s):
__
diam.:
__
filtration area:
__
housing diam.:
__
inlet to outlet H:
__
material: PTFE membranehigh-density polyethylene housing
Quality Level: __
sterility: non-sterile
feature: holdup volume< 10 μLhydrophobic
parameter: 14 bar max. inlet pressure (200 psi)45 °C max. temp.
technique(s): HPLC: suitableUV/Vis spectroscopy: suitableanalytical sample preparation: suitable
diam.: 4 mm
filtration area: 0.1 cm2
housing diam.: __
inlet to outlet H: __
material:
PTFE membranehigh-density polyethylene housing
Quality Level:
__
sterility:
non-sterile
feature:
holdup volume< 10 μLhydrophobic
parameter:
14 bar max. inlet pressure (200 psi)45 °C max. temp.
technique(s):
HPLC: suitableUV/Vis spectroscopy: suitableanalytical sample preparation: suitable
diam.:
4 mm
filtration area:
0.1 cm2
housing diam.:
__
inlet to outlet H:
__
material: PTFE membranehigh-density polyethylene housing
Quality Level: __
sterility: non-sterile
feature: holdup volume< 10 μLhydrophobic
parameter: 14 bar max. inlet pressure (200 psi)45 °C max. temp.
technique(s): HPLC: suitableUV/Vis spectroscopy: suitableanalytical sample preparation: suitable
diam.: 4 mm
filtration area: 0.1 cm2
housing diam.: __
inlet to outlet H: __
material:
PTFE membranehigh-density polyethylene housing
Quality Level:
__
sterility:
non-sterile
feature:
holdup volume< 10 μLhydrophobic
parameter:
14 bar max. inlet pressure (200 psi)45 °C max. temp.
technique(s):
HPLC: suitableUV/Vis spectroscopy: suitableanalytical sample preparation: suitable
diam.:
4 mm
filtration area:
0.1 cm2
housing diam.:
__
inlet to outlet H:
__