Viresolve® Pro Shield
Virus prefilter, Viresolve® Pro Shield, Micro kit, filtration area 3.1 cm²
Manufacturer: Millipore
Synonym(S): Viresolve® Pro Shield Micro Kit
Select a Size
| Pack Size | SKU | Availability | Price |
|---|---|---|---|
| 9 EA | VPMSKITNB9-9-EA | In Stock | ₹ 46,029.48 |
VPMSKITNB9 - 9 EA
In Stock
Quantity
1
Base Price: ₹ 46,029.48
GST (18%): ₹ 8,285.306
Total Price: ₹ 54,314.786
material
molded polypropylene component(s)polyethersulfone membranewhite device (magenta band)
Quality Level
400
manufacturer/tradename
Viresolve®
parameter
3.5 bar max. inlet pressure (50 psig)4.1 bar max. pressure (60 psid) at 25 °C (Samples were integral based on an Air/ Water Diffusion Test, before and after a forward stress.)
H × diam.
3.83 cm (1.51 in.) × 3.07 cm (1.21 in.)
H
3.83 cm (1.51 in.)
diam.
3.07 cm (1.21 in.)
filtration area
3.1 cm2
impurities
<0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
fitting
female Luer-Lok® inlet (inlet and vent) female Luer inlet fitting male Luer outlet (Slip) male Luer outlet fitting
Related Products
Description
- General description: The Viresolve Pro PD kit is ideally suited for performing your evaluation, optimization and scaling studies. Each kit contains 9 Micro devices from one membrane layering combination*, a user guide and certificate of quality. The air vent prevents air locking within the device.* Viresolve Pro devices are built with two membrane layers. Each Viresolve Pro Shield Micro device is packaged in a blister pack and labeled with the device lot and the top layer membrane lot/roll number.
- Features and Benefits: Small scale devices for process development, optimization and validation studies Membrane based adsorptive prefilters to remove protein aggregates and other fouling species Nine units per kit (one Membrane lot)
- Other Notes: These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
- Preparation Note: This product was manufactured with materials that meet the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
- Analysis Note: TOC/ConductivityAfter a controlled water flush of 50 L/m², samples exhibited less than 500 ppb TOC per USP <64> and less than 1.3 µS/cm per USP <64>.
- Legal Information: Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Compare Similar Items
Show Difference
material: molded polypropylene component(s)polyethersulfone membranewhite device (magenta band)
Quality Level: 400
manufacturer/tradename: Viresolve®
parameter: 3.5 bar max. inlet pressure (50 psig)4.1 bar max. pressure (60 psid) at 25 °C (Samples were integral based on an Air/ Water Diffusion Test, before and after a forward stress.)
H × diam.: 3.83 cm (1.51 in.) × 3.07 cm (1.21 in.)
H: 3.83 cm (1.51 in.)
diam.: 3.07 cm (1.21 in.)
filtration area: 3.1 cm2
impurities: <0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
fitting: female Luer-Lok® inlet (inlet and vent) female Luer inlet fitting male Luer outlet (Slip) male Luer outlet fitting
material: PVDF housingpolyethersulfone membranesilicone O-ringwhite device
Quality Level: 400
manufacturer/tradename: Viresolve®
parameter: 4.1 bar max. inlet pressure (60 psig)
H × diam.: __
H: 5.92 cm (2.33 in.)
diam.: __
filtration area: 0.017 m2
impurities: __
fitting: __
material: PVDF housingpolyethersulfone membranesilicone O-ringwhite device
Quality Level: 400
manufacturer/tradename: Viresolve®
parameter: 4.1 bar max. inlet pressure (60 psig)
H × diam.: __
H: 5.92 cm (2.33 in.)
diam.: __
filtration area: 0.017 m2
impurities: __
fitting: __