Filter

2 NHBoc, 1 azide (core)

2 NHBoc, 1 Biotin (core)

4 NHBoc, 1 azide (core)

8 carboxyl, 1 biotin (core)

8 mol% is approximately 9 wt%.

8 NHBoc, 1 azide (core)

8 NHBoc, 1 NHS (core)

98% cis

amidoethanol surface groups

amino surface groups

Chamfered tips, 33G, 0.25", 25/box Black

contains: ~650ppm MEHQ as inhibitor

Degree of functionalization: 15-25%

degree of functionalization: 20-40%

Degree of functionalization: 30-40%

Degree of Substitution: 15-25%

dextrose equivalent 15.0 - 20.0

dextrose equivalent 16.5 - 19.5

dextrose equivalent 4.0 - 7.0

drop point 105 °C Mettler

ester terminated

Excitation/emission: 460/500 nm

Excitation/Emission: 530/582 nm

Excitation/Emission: 780/820 nm

functionality 1.7

functionality 1.8

functionality 2.5

GPC 5-15 kDa

hydroxyl surface groups

Identity: Conforms to structure

Identity: Conforms to structure (by NMR)

K-value 34 - 40 DIN 53 726

K-value 55 - 57

K-value 69 - 71

NHBoc, 1 NHS (core)

NMR: Conforms to structure

No. 1 thickness (0.13-0.16 mm)

non-ionic

PEG average Mn 10,000 kDa; n~220

sodium carboxylate surface groups

succinamic acid surface groups

suitable for 3D bioprinting applications

surface tension 43 mN/m (1% aqueous)

Tg 34°C

unsaturation 98 mole %

Validation : HNMR at 40°C

Validation : HNMR at 40C

Ω-end acrylateα-end acrylate

Ω-end: Hydrazideα-end: methoxy

Ω-end: methacrylateα-end: methacrylate

(Coarse ground flakes and powder)

(Liquid, solid, or semi-solid)

(Powder or Chunk(s) or Fibers )

(powder or chunk(s) or fibers)

(Powder or chunk(s) or fibers)

(Powder or Solid or Chunk(s))

(Solid chunks, fibers or powder)

(Solid chunks, fibres or powder)

(solid or chunk(s) or fiber)

(solid, chunks or fiber)

(wet)

amorphous

beads

beads or pellets

chips

chips or granules

chunks

chunkscrystalsgranular

chunkspowder or crystals

colloidal, microcrystalline

crystalline (solid )

crystalline powder

crystalline powdercrystals

crystals

fibers

fine powder

flakes

flakes (or pellets)

flakes or chunk(s)

flakespowder or crystals

gel form

gel form (viscous)

gel form (Viscous)

granular

liquid

liquid (or paste)

low-melting solid

lyophilized

lyophilized powder

microcrystallinepowder

paste

pastesolid

pellets

pellets (~3 mm)

powder

powder (Coarse)

powder (crystalline)

powder (Free-flowing granular)

powder (free-flowing)

powder (lyophilized)

powder or chunks

powder or chunks ( or fibers)

powder or chunks (fibers)

powder or chunks (or fibers)

powder or chunks (or Fibers)

powder or chunks (or fibres)

powder or chunks (or Fibres)

powder or crystals

powder or crystals (or flakes)

powder or crystalspowder or granules

powder or granules

powder or solid

powder or solid (or chunk(s))

powder, chunks or granules

semisolid

shavings

slab/chunk

solid

solid (bead)

solid (Chunks)

solid (could be powder/granules/chunks)

solid (filament)

solid (or Chunk(s))

solid (Viscous)

solid (waxy)

solid or liquid

solution

suspension

viscous liquid

viscous liquid (gel)

viscous liquid (or gel)

viscous liquid (to gel)

viscous liquid (to powder)

waxy solid (moist)

<0.1% residual TDI

<0.5% water

<0.7% polymerized vinyl acetate

<1 wt. % monomer<2 wt. % trimer

<1% diethylene glycol monobutyl ether

<10 CFU/g Bioburden<100 EU/g Endotoxin

<10 CFU/g Bioburden<125 EU/g Endotoxin

<2% benzene

<2% ethyl acetate

<25 EU/mL Endotoxin<5 cfu/mL Bioburden

<3% acetic acid

<3% benzene

<3% methylene chloride

<4% water

<5 CFU/g Bioburden

<5 cfu/mL Bioburden<50 EU/mL Endotoxin

<5 wt. %

<5% methyl alcohol

<600 ppm residual acrylic acid

≤0.035% Water (Karl Fischer)

≤0.1% Sulfated Ash (CONF0010 Conforms)

≤0.1% water

≤0.125 EU/mg Endotoxin

≤0.15% dioctyl phthalate (typical)

≤0.2 wt. % Monomer

≤0.5% water

≤1.0% water

≤1.5% NaCl6-10% water

≤1% water

≤10 EU/g Endotoxin

≤10% disulfide

≤100 EU/g Endotoxins

≤100.0 ppm Trace Metal Analysis

≤15.0 ppm Trace Metal Analysis

≤150.0 ppm Trace Metal Analysis

≤3.0% water

≤3% water

≤5 CFU/g

≤5% mineral oil

≤50.0 ppm Trace Rare Earth Analysis

≤500 ppm (GC)

≤5000 ppm (GC)

≤5000 ppm (residual monomer by GC)

≤7.0 wt. % water

0.02% epichlorohydrin

1-2% DMF

1% methyl alcohol from hydrolysis

10-40% triester

10.0-11.6% residual content of acetyl

16 wt. % reducing sugars5 wt. %

18-30% water

3% acryloyl chloride3% phenol

4 wt. % reducing sugars6 wt. %

4% fumaric acid

4% sulfur

5% moisture

8-14% water

endotoxin, tested

, light yellow

, Pale white to colorless

, white to light brown

Bioburden

black

blue to teal

clear colorless to pale yellow

clearoily

colorless

colorless to faint yellow

colorless to light brown

colorless to light yellow

colorless to orange

colorless to pale yellow

colorless to white

colorless to yellow

colorless, or white

dark blue to purple

light yellow

light yellow to light brown

light yellow to tan

none

off-white to beige

off-white to faint brown

off-white to pale yellow

off-white to yellow

orange to red

orange, natural

pale yellow

pale yellow to colorless

pale yellow to yellow

purple

red

red to maroon

red to pink

slightly tan

white

white to beige

white to beige, light yellow

white to beige, powder

white to faint brown

white to faint yellow

white to faint yellow-brown

white to light brown

white to light yellow

white to light yellow, light brown

white to off-white

white to pale yellow

white to tan

white to yellow

yellow

yellow to brown

yellow to light tan

yellow to orange

(6.5-7.5)

~2.5 (5% in H2O)

~6.4

1.0-3.0

1.55 (25 °C)

10.5 (3 wt. %)

11.7(lit.)

12

2-5

2.0-2.2 (20 °C, 100 g/L)

2.5-4

2.95 (10 wt. % in H2O)

3-4

3-4 (25 °C)

4-7 (20 °C, 100 g/L in H2O)

4.3

4.5-7.5

5-7 (11 wt. %)

5-7 (20 °C, 100 g/L in H2O)

5.0-6.5

5.0-8.5

5.5-6.0

5.5-7.5

5.5-8.5 (20 °C, 1% in water)

6-7 (23 °C, at 10 g/l)

6-8

6-9

6.0-7.4 (2.5% in H2O)

6.5 (25 °C, 5%, aqueous solution)

6.5-7.5

7 (23 °C, 10 g/L)

7.5-10.5 (5%aqueous solution)

7.5-8.5 (10 wt. % in solution)

8-9

8.0±0.2 ( in neat)