SPGEA25NB6
Millipore Express® PHF, OptiScale® Capsule
filtration area 3.5 cm2, OptiScale® 25
Manufacturer: Millipore
Synonym(S): Millipore Express PHF Optiscale 25mm 0.2 m NB
Select a Size
| Pack Size | SKU | Availability | Price |
|---|---|---|---|
| 6 PKG | SPGEA25NB6-6-PKG | In Stock | ₹ 18,991.38 |
SPGEA25NB6 - 6 PKG
In Stock
Quantity
1
Base Price: ₹ 18,991.38
GST (18%): ₹ 3,418.448
Total Price: ₹ 22,409.828
material
polyethersulfone membranepolypropylene polypropylene supportpolypropylene vent cap
Quality Level
400
reg. compliance
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility
non-sterile
Sterilization Compatibility
autoclavable compatible
product line
OptiScale® 25
feature
hydrophilic
manufacturer/tradename
Millipore Express®
parameter
4.1 bar max. inlet pressure (60 psi) at 25 °C60 psi max. differential pressure (4.1 bar) at 25 °C (forward)
technique(s)
bioburden reduction: suitable
Related Products
Description
- General description: Device Configuration: Capsule
- Other Notes: These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
- Preparation Note: Sterilization Method1 autoclave cycle of 60 min @ 123 °C
- Analysis Note: TOC/ConductivityAfter sterilization and a controlled water flush of 15 mL, samples exhibited less than 500 ppb TOC per USP <64> and less than 1.3 µS/cm per USP <64>.
- Legal Information: Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Compare Similar Items
Show Difference
material: polyethersulfone membranepolypropylene polypropylene supportpolypropylene vent cap
Quality Level: 400
reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility: non-sterile
Sterilization Compatibility: autoclavable compatible
product line: OptiScale® 25
feature: hydrophilic
manufacturer/tradename: Millipore Express®
parameter: 4.1 bar max. inlet pressure (60 psi) at 25 °C60 psi max. differential pressure (4.1 bar) at 25 °C (forward)
technique(s): bioburden reduction: suitable
material:
polyethersulfone membranepolypropylene polypropylene supportpolypropylene vent cap
Quality Level:
400
reg. compliance:
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility:
non-sterile
Sterilization Compatibility:
autoclavable compatible
product line:
OptiScale® 25
feature:
hydrophilic
manufacturer/tradename:
Millipore Express®
parameter:
4.1 bar max. inlet pressure (60 psi) at 25 °C60 psi max. differential pressure (4.1 bar) at 25 °C (forward)
technique(s):
bioburden reduction: suitable
material: polyethersulfone membranestyrene-acrylonitrile (SAN)
Quality Level: 400
reg. compliance: __
sterility: sterile
Sterilization Compatibility: __
product line: Steripak
feature: holdup volume 2.7 mLhydrophilic
manufacturer/tradename: __
parameter: 0.35 bar max. inlet pressure (5 psi) (Reverse)45 °C max. temp.5.2 bar max. inlet pressure (75 psi) (Forward)
technique(s): sterile filtration: suitable
material:
polyethersulfone membranestyrene-acrylonitrile (SAN)
Quality Level:
400
reg. compliance:
__
sterility:
sterile
Sterilization Compatibility:
__
product line:
Steripak
feature:
holdup volume 2.7 mLhydrophilic
manufacturer/tradename:
__
parameter:
0.35 bar max. inlet pressure (5 psi) (Reverse)45 °C max. temp.5.2 bar max. inlet pressure (75 psi) (Forward)
technique(s):
sterile filtration: suitable
material: polyethersulfone membranestyrene-acrylonitrile (SAN)
Quality Level: 400
reg. compliance: __
sterility: sterile
Sterilization Compatibility: __
product line: Steripak
feature: holdup volume 2.7 mLhydrophilic
manufacturer/tradename: __
parameter: 0.35 bar max. inlet pressure (5 psi) (Reverse)45 °C max. temp.5.2 bar max. inlet pressure (75 psi) (Forward)
technique(s): sterile filtration: suitable
material:
polyethersulfone membranestyrene-acrylonitrile (SAN)
Quality Level:
400
reg. compliance:
__
sterility:
sterile
Sterilization Compatibility:
__
product line:
Steripak
feature:
holdup volume 2.7 mLhydrophilic
manufacturer/tradename:
__
parameter:
0.35 bar max. inlet pressure (5 psi) (Reverse)45 °C max. temp.5.2 bar max. inlet pressure (75 psi) (Forward)
technique(s):
sterile filtration: suitable
material: __
Quality Level: SP2
reg. compliance: __
sterility: __
Sterilization Compatibility: __
product line: __
feature: __
manufacturer/tradename: __
parameter: __
technique(s): __
material:
__
Quality Level:
SP2
reg. compliance:
__
sterility:
__
Sterilization Compatibility:
__
product line:
__
feature:
__
manufacturer/tradename:
__
parameter:
__
technique(s):
__