CR0173E06
Polygard® CR Cartridge Filter
pore size 1.0 μm, cartridge nominal length 30 in. (75 cm), Code 7 (2-226; O-rings w/locking-tabs)
Manufacturer: Millipore
Select a Size
| Pack Size | SKU | Availability | Price |
|---|---|---|---|
| 6 PKG | CR0173E06-6-PKG | In Stock | ₹ 1,15,568.76 |
CR0173E06 - 6 PKG
In Stock
Quantity
1
Base Price: ₹ 1,15,568.76
GST (18%): ₹ 20,802.377
Total Price: ₹ 1,36,371.137
material
EPR sealpolypropylene
Quality Level
400
feature
hydrophilic
manufacturer/tradename
Polygard
parameter
4.8 bar max. differential pressure (70 psid) at 25 °C4.8 bar max. inlet pressure (70 psi) at 25 °C
cartridge nominal length
30 in. (75 cm)
diam.
7.0 cm (2.75 in.)
impurities
≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
gravimetric extractables
≤50 mg
pore size
1.0 μm nominal pore size1.0 μm pore size
Related Products
Description
- General description: Device Configuration: Cartridge
- Preparation Note: Sanitization Protocol30 min with hot water @ 80 °C
- Analysis Note: Gravimetric Extractables: after 24-h soak in water
- Legal Information: POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
Compare Similar Items
Show Difference
material: EPR sealpolypropylene
Quality Level: 400
feature: hydrophilic
manufacturer/tradename: Polygard
parameter: 4.8 bar max. differential pressure (70 psid) at 25 °C4.8 bar max. inlet pressure (70 psi) at 25 °C
cartridge nominal length: 30 in. (75 cm)
diam.: 7.0 cm (2.75 in.)
impurities: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
gravimetric extractables: ≤50 mg
pore size: 1.0 μm nominal pore size1.0 μm pore size
material:
EPR sealpolypropylene
Quality Level:
400
feature:
hydrophilic
manufacturer/tradename:
Polygard
parameter:
4.8 bar max. differential pressure (70 psid) at 25 °C4.8 bar max. inlet pressure (70 psi) at 25 °C
cartridge nominal length:
30 in. (75 cm)
diam.:
7.0 cm (2.75 in.)
impurities:
≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
gravimetric extractables:
≤50 mg
pore size:
1.0 μm nominal pore size1.0 μm pore size
material: polyethylene sealpolypropylene
Quality Level: 400
feature: hydrophilic
manufacturer/tradename: Polygard
parameter: 4.8 bar max. differential pressure (70 psid) at 25 °C4.8 bar max. inlet pressure (70 psi) at 25 °C
cartridge nominal length: 10 in. (25 cm)
diam.: 7.0 cm (2.75 in.)
impurities: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
gravimetric extractables: ≤50 mg
pore size: 1.0 μm nominal pore size1.0 μm pore size
material:
polyethylene sealpolypropylene
Quality Level:
400
feature:
hydrophilic
manufacturer/tradename:
Polygard
parameter:
4.8 bar max. differential pressure (70 psid) at 25 °C4.8 bar max. inlet pressure (70 psi) at 25 °C
cartridge nominal length:
10 in. (25 cm)
diam.:
7.0 cm (2.75 in.)
impurities:
≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
gravimetric extractables:
≤50 mg
pore size:
1.0 μm nominal pore size1.0 μm pore size
material: polyethylene sealpolypropylene
Quality Level: 400
feature: hydrophilic
manufacturer/tradename: Polygard
parameter: 4.8 bar max. differential pressure (70 psid) at 25 °C4.8 bar max. inlet pressure (70 psi) at 25 °C
cartridge nominal length: 20 in. (50 cm)
diam.: 7.0 cm (2.75 in.)
impurities: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
gravimetric extractables: ≤50 mg
pore size: 1.0 μm nominal pore size1.0 μm pore size
material:
polyethylene sealpolypropylene
Quality Level:
400
feature:
hydrophilic
manufacturer/tradename:
Polygard
parameter:
4.8 bar max. differential pressure (70 psid) at 25 °C4.8 bar max. inlet pressure (70 psi) at 25 °C
cartridge nominal length:
20 in. (50 cm)
diam.:
7.0 cm (2.75 in.)
impurities:
≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
gravimetric extractables:
≤50 mg
pore size:
1.0 μm nominal pore size1.0 μm pore size
material: polypropylene silicone seal
Quality Level: 400
feature: hydrophilic
manufacturer/tradename: Polygard
parameter: 4.8 bar max. differential pressure (70 psid) at 25 °C4.8 bar max. inlet pressure (70 psi) at 25 °C
cartridge nominal length: 20 in. (50 cm)
diam.: 7.0 cm (2.75 in.)
impurities: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
gravimetric extractables: ≤50 mg
pore size: 1.0 μm nominal pore size1.0 μm pore size
material:
polypropylene silicone seal
Quality Level:
400
feature:
hydrophilic
manufacturer/tradename:
Polygard
parameter:
4.8 bar max. differential pressure (70 psid) at 25 °C4.8 bar max. inlet pressure (70 psi) at 25 °C
cartridge nominal length:
20 in. (50 cm)
diam.:
7.0 cm (2.75 in.)
impurities:
≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
gravimetric extractables:
≤50 mg
pore size:
1.0 μm nominal pore size1.0 μm pore size