CS40MS02H1
Clarisolve® Depth Filters
High-density cell cultures
Manufacturer: Millipore
Synonym(S): Clarisolve 40 μm Lab Scale Depth Filters, 0.027 m2 (0.29 ft2)
Select a Size
| Pack Size | SKU | Availability | Price |
|---|---|---|---|
| 1 EA | CS40MS02H1-1-EA | In Stock | ₹ 46,749.93 |
CS40MS02H1 - 1 EA
In Stock
Quantity
1
Base Price: ₹ 46,749.93
GST (18%): ₹ 8,414.987
Total Price: ₹ 55,164.917
material
Millistak+® mediaTPE sealpolypropylene
Quality Level
400
manufacturer/tradename
Clarisolve®
parameter
2.1 bar max. differential pressure (30 psid) at 37 °C (Forward)2.1 bar max. differential pressure (30 psid) at 37 °C (Maximum)2.1 bar max. differential pressure (30 psid) at 37 °C (Reverse)2.1 bar max. differential pressure (30 psid) at 4 °C (Forward)
H
14 cm (5.3 in.)
L
22 cm (8.5 in.)
W
9.4 cm (3.7 in.)
filtration area
0.027 m2
impurities
<0.25 EU/mL (LAL test, Aqueous extraction; on filter media only)
total organic carbon (TOC) residue
0.9-1.2 μg/L
Related Products
Description
- General description: product water; post autoclave (1 cycle of 60 minutes at 123 °C) and flushed at a flux rate of 600 LMH pure water flush for 10 minutes. A sample of filtrate was pulled every 2 minutes during flush and tested for conductivity.
- Application: High-density cell cultures
- Specifications: Filter Grade: 40MS
- Preparation Note: Sterilization MethodIntegrity is maintained after 2 autoclave cycles of 60 minutes at 123 °C.
- Analysis Note: Total organic carbon (TOC) residue: Post autoclave (1 cycle of 60 minutes at 123 °C) and flushed at a flux rate of 600 LMH pure water flush for 10 minutes. At the end of the flush, a sample was pulled for TOC typical values.
- Legal Information: CLARISOLVE is a registered trademark of Merck KGaA, Darmstadt, Germany
SAFETY INFORMATION
WGK
nwg
Flash Point(F)
Not applicable
Flash Point(C)
Not applicable
Compare Similar Items
Show Difference
material: Millistak+® mediaTPE sealpolypropylene
Quality Level: 400
manufacturer/tradename: Clarisolve®
parameter: 2.1 bar max. differential pressure (30 psid) at 37 °C (Forward)2.1 bar max. differential pressure (30 psid) at 37 °C (Maximum)2.1 bar max. differential pressure (30 psid) at 37 °C (Reverse)2.1 bar max. differential pressure (30 psid) at 4 °C (Forward)
H: 14 cm (5.3 in.)
L: 22 cm (8.5 in.)
W: 9.4 cm (3.7 in.)
filtration area: 0.027 m2
impurities: <0.25 EU/mL (LAL test, Aqueous extraction; on filter media only)
total organic carbon (TOC) residue: 0.9-1.2 μg/L
material:
Millistak+® mediaTPE sealpolypropylene
Quality Level:
400
manufacturer/tradename:
Clarisolve®
parameter:
2.1 bar max. differential pressure (30 psid) at 37 °C (Forward)2.1 bar max. differential pressure (30 psid) at 37 °C (Maximum)2.1 bar max. differential pressure (30 psid) at 37 °C (Reverse)2.1 bar max. differential pressure (30 psid) at 4 °C (Forward)
H:
14 cm (5.3 in.)
L:
22 cm (8.5 in.)
W:
9.4 cm (3.7 in.)
filtration area:
0.027 m2
impurities:
<0.25 EU/mL (LAL test, Aqueous extraction; on filter media only)
total organic carbon (TOC) residue:
0.9-1.2 μg/L
material: Millistak+® mediapolypropylene
Quality Level: 400
manufacturer/tradename: Clarisolve®
parameter: 1.0 bar max. differential pressure (15 psid) at ≤80 °C (Maximum)2.1 bar max. differential pressure (30 psid) at 25 °C (Forward)2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse)3.5 bar max. differential pressure (50 psid) at ≤25 °C (Maximum)
H: 32 cm (12.5 in.)
L: 62 cm (24.2 in.)
W: 11.20 cm (4.4 in.)
filtration area: 0.33 m2
impurities: <0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
total organic carbon (TOC) residue: __
material:
Millistak+® mediapolypropylene
Quality Level:
400
manufacturer/tradename:
Clarisolve®
parameter:
1.0 bar max. differential pressure (15 psid) at ≤80 °C (Maximum)2.1 bar max. differential pressure (30 psid) at 25 °C (Forward)2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse)3.5 bar max. differential pressure (50 psid) at ≤25 °C (Maximum)
H:
32 cm (12.5 in.)
L:
62 cm (24.2 in.)
W:
11.20 cm (4.4 in.)
filtration area:
0.33 m2
impurities:
<0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
total organic carbon (TOC) residue:
__
material: Millistak+® mediapolypropylene
Quality Level: 400
manufacturer/tradename: Clarisolve®
parameter: 1.0 bar max. differential pressure (15 psid) at ≤80 °C (Maximum)2.1 bar max. differential pressure (30 psid) at 25 °C (Forward)2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse)3.5 bar max. differential pressure (50 psid) at ≤25 °C (Maximum)
H: 32 cm (12.5 in.)
L: 62 cm (24.2 in.)
W: 17.3 cm (6.8 in.)
filtration area: 0.55 m2
impurities: <0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
total organic carbon (TOC) residue: __
material:
Millistak+® mediapolypropylene
Quality Level:
400
manufacturer/tradename:
Clarisolve®
parameter:
1.0 bar max. differential pressure (15 psid) at ≤80 °C (Maximum)2.1 bar max. differential pressure (30 psid) at 25 °C (Forward)2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse)3.5 bar max. differential pressure (50 psid) at ≤25 °C (Maximum)
H:
32 cm (12.5 in.)
L:
62 cm (24.2 in.)
W:
17.3 cm (6.8 in.)
filtration area:
0.55 m2
impurities:
<0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
total organic carbon (TOC) residue:
__
material: TPE sealpolypropylene
Quality Level: 400
manufacturer/tradename: Clarisolve®
parameter: 2.1 bar max. differential pressure (30 psid) at 37 °C (Forward)2.1 bar max. differential pressure (30 psid) at 37 °C (Maximum)2.1 bar max. differential pressure (30 psid) at 37 °C (Reverse)2.1 bar max. differential pressure (30 psid) at 4 °C (Forward)
H: 14 cm (5.3 in.)
L: 22 cm (8.5 in.)
W: 7.4 cm (2.9 in.)
filtration area: 0.014 m2
impurities: <0.25 EU/mL (LAL test, Aqueous extraction; on filter media only)
total organic carbon (TOC) residue: __
material:
TPE sealpolypropylene
Quality Level:
400
manufacturer/tradename:
Clarisolve®
parameter:
2.1 bar max. differential pressure (30 psid) at 37 °C (Forward)2.1 bar max. differential pressure (30 psid) at 37 °C (Maximum)2.1 bar max. differential pressure (30 psid) at 37 °C (Reverse)2.1 bar max. differential pressure (30 psid) at 4 °C (Forward)
H:
14 cm (5.3 in.)
L:
22 cm (8.5 in.)
W:
7.4 cm (2.9 in.)
filtration area:
0.014 m2
impurities:
<0.25 EU/mL (LAL test, Aqueous extraction; on filter media only)
total organic carbon (TOC) residue:
__