KN03A05FF1
Opticap® XL5 Polygard® CN
inlet connection diam. 3/4 in., pore size 0.3 μm, cartridge nominal length 5 in. (12.5 cm)
Manufacturer: Millipore
Synonym(S): Opticap XL5 Polygard-CN 0.3 m 3/4 in. TC/TC
Select a Size
| Pack Size | SKU | Availability | Price |
|---|---|---|---|
| 1 EA | KN03A05FF1-1-EA | In Stock | ₹ 34,784.07 |
KN03A05FF1 - 1 EA
In Stock
Quantity
1
Base Price: ₹ 34,784.07
GST (18%): ₹ 6,261.133
Total Price: ₹ 41,045.203
material
polypropylene polypropylene housingpolypropylene supportpolypropylene vent capsilicone seal
Quality Level
400
reg. compliance
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename
Opticap®
parameter
1.0 bar max. inlet pressure (15 psi) at 80 °C2.75 bar max. inlet pressure (40 psi) at 60 °C25 °C max. inlet temp.4.8 bar max. differential pressure (70 psid) at 20 °C5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
L
21.6 cm (8.5 in.)
cartridge nominal length
5 in. (12.5 cm)
diam.
10.7 cm (4.2 in.)
filtration area
0.18 m2
inlet connection diam.
3/4 in.
Related Products
Description
- General description: Device Configuration: Capsule
- Features and Benefits: Format: Single Layer
- Packaging: Double Easy-Open bag
- Other Notes: These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
- Preparation Note: Sterilization Method3 autoclave cycles of 30 min @ 126 °C; not in-line steam sterilizable
- Analysis Note: Gravimetric Extractables: after 24 hours in water at controlled room temperature
- Legal Information: OPTICAP is a registered trademark of Merck KGaA, Darmstadt, Germany
- Disclaimer: EMD Millipore Corporation certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
Compare Similar Items
Show Difference
material: polypropylene polypropylene housingpolypropylene supportpolypropylene vent capsilicone seal
Quality Level: 400
reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename: Opticap®
parameter: 1.0 bar max. inlet pressure (15 psi) at 80 °C2.75 bar max. inlet pressure (40 psi) at 60 °C25 °C max. inlet temp.4.8 bar max. differential pressure (70 psid) at 20 °C5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
L: 21.6 cm (8.5 in.)
cartridge nominal length: 5 in. (12.5 cm)
diam.: 10.7 cm (4.2 in.)
filtration area: 0.18 m2
inlet connection diam.: 3/4 in.
material:
polypropylene polypropylene housingpolypropylene supportpolypropylene vent capsilicone seal
Quality Level:
400
reg. compliance:
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename:
Opticap®
parameter:
1.0 bar max. inlet pressure (15 psi) at 80 °C2.75 bar max. inlet pressure (40 psi) at 60 °C25 °C max. inlet temp.4.8 bar max. differential pressure (70 psid) at 20 °C5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
L:
21.6 cm (8.5 in.)
cartridge nominal length:
5 in. (12.5 cm)
diam.:
10.7 cm (4.2 in.)
filtration area:
0.18 m2
inlet connection diam.:
3/4 in.
material: polypropylene polypropylene housingpolypropylene supportpolypropylene vent capsilicone seal
Quality Level: 400
reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename: Opticap®
parameter: 1.0 bar max. inlet pressure (15 psi) at 80 °C2.75 bar max. inlet pressure (40 psi) at 60 °C25 °C max. inlet temp.4.8 bar max. differential pressure (70 psid) at 20 °C5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
L: 21.6 cm (8.5 in.)
cartridge nominal length: 5 in. (12.5 cm)
diam.: 10.7 cm (4.2 in.)
filtration area: 0.18 m2
inlet connection diam.: 9/16 in.
material:
polypropylene polypropylene housingpolypropylene supportpolypropylene vent capsilicone seal
Quality Level:
400
reg. compliance:
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename:
Opticap®
parameter:
1.0 bar max. inlet pressure (15 psi) at 80 °C2.75 bar max. inlet pressure (40 psi) at 60 °C25 °C max. inlet temp.4.8 bar max. differential pressure (70 psid) at 20 °C5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
L:
21.6 cm (8.5 in.)
cartridge nominal length:
5 in. (12.5 cm)
diam.:
10.7 cm (4.2 in.)
filtration area:
0.18 m2
inlet connection diam.:
9/16 in.
material: polypropylene polypropylene housingpolypropylene supportpolypropylene vent capsilicone seal
Quality Level: 400
reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename: Opticap®
parameter: 1.0 bar max. inlet pressure (15 psi) at 80 °C2.75 bar max. inlet pressure (40 psi) at 60 °C25 °C max. inlet temp.4.8 bar max. differential pressure (70 psid) at 20 °C5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
L: 21.6 cm (8.5 in.)
cartridge nominal length: 5 in. (12.5 cm)
diam.: 10.7 cm (4.2 in.)
filtration area: 0.18 m2
inlet connection diam.: 1.5 in.
material:
polypropylene polypropylene housingpolypropylene supportpolypropylene vent capsilicone seal
Quality Level:
400
reg. compliance:
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename:
Opticap®
parameter:
1.0 bar max. inlet pressure (15 psi) at 80 °C2.75 bar max. inlet pressure (40 psi) at 60 °C25 °C max. inlet temp.4.8 bar max. differential pressure (70 psid) at 20 °C5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
L:
21.6 cm (8.5 in.)
cartridge nominal length:
5 in. (12.5 cm)
diam.:
10.7 cm (4.2 in.)
filtration area:
0.18 m2
inlet connection diam.:
1.5 in.
material: polypropylene polypropylene housingpolypropylene supportpolypropylene vent capsilicone seal
Quality Level: 400
reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename: Opticap®
parameter: 1.0 bar max. inlet pressure (15 psi) at 80 °C2.75 bar max. inlet pressure (40 psi) at 60 °C25 °C max. inlet temp.4.8 bar max. differential pressure (70 psid) at 20 °C5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
L: 33.5 cm (13.2 in.)
cartridge nominal length: 10 in. (25 cm)
diam.: 10.7 cm (4.2 in.)
filtration area: 0.42 m2
inlet connection diam.: 9/16 in.
material:
polypropylene polypropylene housingpolypropylene supportpolypropylene vent capsilicone seal
Quality Level:
400
reg. compliance:
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename:
Opticap®
parameter:
1.0 bar max. inlet pressure (15 psi) at 80 °C2.75 bar max. inlet pressure (40 psi) at 60 °C25 °C max. inlet temp.4.8 bar max. differential pressure (70 psid) at 20 °C5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
L:
33.5 cm (13.2 in.)
cartridge nominal length:
10 in. (25 cm)
diam.:
10.7 cm (4.2 in.)
filtration area:
0.42 m2
inlet connection diam.:
9/16 in.