KN12A3TTT1
Opticap® XLT30 Polygard®
inlet connection diam. 1.5 in., pore size 1.2 μm, cartridge nominal length 30 in. (75 cm)
Manufacturer: Millipore
Synonym(S): Opticap XLT 30" Polygard CN 1.2 um 1.5" TC/TC 1/pk
Select a Size
| Pack Size | SKU | Availability | Price |
|---|---|---|---|
| 1 EA | KN12A3TTT1-1-EA | In Stock | ₹ 1,19,360.52 |
KN12A3TTT1 - 1 EA
In Stock
Quantity
1
Base Price: ₹ 1,19,360.52
GST (18%): ₹ 21,484.894
Total Price: ₹ 1,40,845.414
material
polypropylene polypropylene housingpolypropylene supportpolypropylene vent capsilicone seal
Quality Level
400
reg. compliance
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename
Opticap®
parameter
25 °C max. inlet temp.80 psig max. inlet pressure
cartridge nominal length
30 in. (75 cm)
inlet connection diam.
1.5 in.
outlet connection diam.
1.5 in.
impurities
≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)<0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
gravimetric extractables
≤165 mg/capsule
Related Products
Description
- General description: Device Configuration: Capsule
- Features and Benefits: Format: Single Layer
- Packaging: Double Easy-Open bag
- Other Notes: These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
- Preparation Note: Sterilization Method3 autoclave cycles of 30 min @ 126 °C; not in-line steam sterilizable
- Analysis Note: Gravimetric Extractables: after 24 hours in water at controlled room temperature
- Legal Information: OPTICAP is a registered trademark of Merck KGaA, Darmstadt, Germany
Compare Similar Items
Show Difference
material: polypropylene polypropylene housingpolypropylene supportpolypropylene vent capsilicone seal
Quality Level: 400
reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename: Opticap®
parameter: 25 °C max. inlet temp.80 psig max. inlet pressure
cartridge nominal length: 30 in. (75 cm)
inlet connection diam.: 1.5 in.
outlet connection diam.: 1.5 in.
impurities: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)<0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
gravimetric extractables: ≤165 mg/capsule
material:
polypropylene polypropylene housingpolypropylene supportpolypropylene vent capsilicone seal
Quality Level:
400
reg. compliance:
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename:
Opticap®
parameter:
25 °C max. inlet temp.80 psig max. inlet pressure
cartridge nominal length:
30 in. (75 cm)
inlet connection diam.:
1.5 in.
outlet connection diam.:
1.5 in.
impurities:
≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)<0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
gravimetric extractables:
≤165 mg/capsule
material: polypropylene polypropylene housingpolypropylene supportpolypropylene vent capsilicone seal
Quality Level: 400
reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename: Opticap®
parameter: 1.0 bar max. inlet pressure (15 psi) at 80 °C2.75 bar max. inlet pressure (40 psi) at 60 °C25 °C max. inlet temp.4.8 bar max. differential pressure (70 psid) at 20 °C5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
cartridge nominal length: 5 in. (12.5 cm)
inlet connection diam.: 3/4 in.
outlet connection diam.: __
impurities: __
gravimetric extractables: __
material:
polypropylene polypropylene housingpolypropylene supportpolypropylene vent capsilicone seal
Quality Level:
400
reg. compliance:
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename:
Opticap®
parameter:
1.0 bar max. inlet pressure (15 psi) at 80 °C2.75 bar max. inlet pressure (40 psi) at 60 °C25 °C max. inlet temp.4.8 bar max. differential pressure (70 psid) at 20 °C5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
cartridge nominal length:
5 in. (12.5 cm)
inlet connection diam.:
3/4 in.
outlet connection diam.:
__
impurities:
__
gravimetric extractables:
__
material: polypropylene polypropylene housingpolypropylene supportpolypropylene vent capsilicone seal
Quality Level: 400
reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename: Opticap®
parameter: 1.0 bar max. inlet pressure (15 psi) at 80 °C2.75 bar max. inlet pressure (40 psi) at 60 °C25 °C max. inlet temp.4.8 bar max. differential pressure (70 psid) at 20 °C5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
cartridge nominal length: 5 in. (12.5 cm)
inlet connection diam.: 9/16 in.
outlet connection diam.: __
impurities: __
gravimetric extractables: __
material:
polypropylene polypropylene housingpolypropylene supportpolypropylene vent capsilicone seal
Quality Level:
400
reg. compliance:
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename:
Opticap®
parameter:
1.0 bar max. inlet pressure (15 psi) at 80 °C2.75 bar max. inlet pressure (40 psi) at 60 °C25 °C max. inlet temp.4.8 bar max. differential pressure (70 psid) at 20 °C5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
cartridge nominal length:
5 in. (12.5 cm)
inlet connection diam.:
9/16 in.
outlet connection diam.:
__
impurities:
__
gravimetric extractables:
__
material: polypropylene polypropylene housingpolypropylene supportpolypropylene vent capsilicone seal
Quality Level: 400
reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename: Opticap®
parameter: 1.0 bar max. inlet pressure (15 psi) at 80 °C2.75 bar max. inlet pressure (40 psi) at 60 °C25 °C max. inlet temp.4.8 bar max. differential pressure (70 psid) at 20 °C5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
cartridge nominal length: 5 in. (12.5 cm)
inlet connection diam.: 1.5 in.
outlet connection diam.: __
impurities: __
gravimetric extractables: __
material:
polypropylene polypropylene housingpolypropylene supportpolypropylene vent capsilicone seal
Quality Level:
400
reg. compliance:
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename:
Opticap®
parameter:
1.0 bar max. inlet pressure (15 psi) at 80 °C2.75 bar max. inlet pressure (40 psi) at 60 °C25 °C max. inlet temp.4.8 bar max. differential pressure (70 psid) at 20 °C5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
cartridge nominal length:
5 in. (12.5 cm)
inlet connection diam.:
1.5 in.
outlet connection diam.:
__
impurities:
__
gravimetric extractables:
__