SN1HA47HH3
Optiscale® Capsule Filter Polygard® CN
filtration area 17.7 cm2, pore size 10.0 μm
Manufacturer: Millipore
Synonym(S): Optiscale Capsule Polygard -CN 10 μm1/4 in. HB/HB
Select a Size
| Pack Size | SKU | Availability | Price |
|---|---|---|---|
| 3 EA | SN1HA47HH3-3-EA | In Stock | ₹ 19,026.51 |
SN1HA47HH3 - 3 EA
In Stock
Quantity
1
Base Price: ₹ 19,026.51
GST (18%): ₹ 3,424.772
Total Price: ₹ 22,451.282
material
PVDF vent capfluoroelastomer FKM sealpolycarbonate polypropylene polypropylene support
Quality Level
400
reg. compliance
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename
OptiScale®
parameter
25 °C max. inlet temp.5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
diam.
6.9 cm (2.7 in.)
filtration area
17.7 cm2
inlet connection diam.
1/4 in.
outlet connection diam.
1/4 in.
impurities
≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
Related Products
Description
- General description: Device Configuration: Capsule
- Features and Benefits: Format: Single Layer
- Other Notes: These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
- Preparation Note: Sterilization Method3 autoclave cycles of 60 min @ 126 °C; not in-line steam sterilizable
- Analysis Note: Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL
- Legal Information: OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany
Compare Similar Items
Show Difference
material: PVDF vent capfluoroelastomer FKM sealpolycarbonate polypropylene polypropylene support
Quality Level: 400
reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename: OptiScale®
parameter: 25 °C max. inlet temp.5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
diam.: 6.9 cm (2.7 in.)
filtration area: 17.7 cm2
inlet connection diam.: 1/4 in.
outlet connection diam.: 1/4 in.
impurities: ≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
material:
PVDF vent capfluoroelastomer FKM sealpolycarbonate polypropylene polypropylene support
Quality Level:
400
reg. compliance:
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename:
OptiScale®
parameter:
25 °C max. inlet temp.5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
diam.:
6.9 cm (2.7 in.)
filtration area:
17.7 cm2
inlet connection diam.:
1/4 in.
outlet connection diam.:
1/4 in.
impurities:
≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
material: PVDF vent capfluoroelastomer FKM sealpolycarbonate polypropylene polypropylene support
Quality Level: 400
reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename: OptiScale®
parameter: 25 °C max. inlet temp.5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
diam.: 6.9 cm (2.7 in.)
filtration area: 17.7 cm2
inlet connection diam.: 3/4 in.
outlet connection diam.: 3/4 in.
impurities: ≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
material:
PVDF vent capfluoroelastomer FKM sealpolycarbonate polypropylene polypropylene support
Quality Level:
400
reg. compliance:
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename:
OptiScale®
parameter:
25 °C max. inlet temp.5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
diam.:
6.9 cm (2.7 in.)
filtration area:
17.7 cm2
inlet connection diam.:
3/4 in.
outlet connection diam.:
3/4 in.
impurities:
≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
material: PVDF vent capfluoroelastomer FKM sealpolycarbonate polypropylene polypropylene support
Quality Level: 400
reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename: OptiScale®
parameter: 25 °C max. inlet temp.5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
diam.: 6.9 cm (2.7 in.)
filtration area: 17.7 cm2
inlet connection diam.: 3/4 in.
outlet connection diam.: 1/4 in.
impurities: ≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
material:
PVDF vent capfluoroelastomer FKM sealpolycarbonate polypropylene polypropylene support
Quality Level:
400
reg. compliance:
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename:
OptiScale®
parameter:
25 °C max. inlet temp.5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
diam.:
6.9 cm (2.7 in.)
filtration area:
17.7 cm2
inlet connection diam.:
3/4 in.
outlet connection diam.:
1/4 in.
impurities:
≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
material: PVDF vent capfluoroelastomer FKM sealpolycarbonate polypropylene polypropylene support
Quality Level: 400
reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename: OptiScale®
parameter: 25 °C max. inlet temp.5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
diam.: 6.9 cm (2.7 in.)
filtration area: 17.7 cm2
inlet connection diam.: 1/4 in.
outlet connection diam.: 1/4 in.
impurities: ≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
material:
PVDF vent capfluoroelastomer FKM sealpolycarbonate polypropylene polypropylene support
Quality Level:
400
reg. compliance:
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
manufacturer/tradename:
OptiScale®
parameter:
25 °C max. inlet temp.5.5 bar max. inlet pressure (80 psi) at 25 °C80 psig max. inlet pressure
diam.:
6.9 cm (2.7 in.)
filtration area:
17.7 cm2
inlet connection diam.:
1/4 in.
outlet connection diam.:
1/4 in.
impurities:
≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)