MilliporeSigma™ Milli-DI™ Water Purification System

Description

• Battery-powered system produces 3 to 5L/day of Type II purified water directly from tap water Supplies purified water at a flowrate of 0.125 gal./min
• (0.5L/min.) attaining >1 megohm·cm resistivity at 25°C (77°F)
• Requires DI-PAK Deionization Cartridge (CPDI000L1), sold separately
• Two-stage purification sequence Activated carbon first removes chlorine and colloids Ion exchange resins remove typical inorganic ions Optional Millipak-40 Final Filter connects directly to water supply or faucet to remove bacteria particles >22μm at point of use (requires Millipak-40 thread adapter, MDI0 2AD AP)
• System Operation Features LED indicates when it is time to change cartridges Temperature-compensated resistivity cell activates a red/green LED to indicate water quality meets requirements Resistivity meter operates on one 9V battery Minimum feedwater pressure: 14psi Maximum feedwater pressure: 65psi DI-PAK™ Deionization Cartridge (sold separately: CPDI000L1, CPDI0NJM1) Exclusive simple “plug-and-use” design Easily replaced in seconds with no risk of leakage Available in two sizes Large pack contains 0.7 gal
• (3.2L) of ion-exchange resin capable of purifying up to 106 gal
• (400L) of feedwater (400μS/cm and 0ppm CO 2 ) Medium pack contains 0.5 gal
• (2.3L) of ion-exchange resin capable of purifying up to 79.3 gal
• (300L) of feedwater (400μS/cm and 0ppm CO 2 ) Applications: Water produced is suitable for chemical and electrochemical applications, as well as for making buffers, reagents and microbiological culture media Can also be used as feedwater for Simplicity™ Ultrapure Water Systems, small autoclaves, and humidifiers, as well as general applications in analytical and bioscience laboratories