03143414001

Genopure Plasmid Midi Kit

Manufacturer: Sigma Aldrich

Synonym(S): plasmid isolation

Select a Size

Pack Size SKU Availability Price
1 TEST 03143414001-1-TEST In Stock ₹ 23,387.70

03143414001 - 1 TEST

₹ 23,387.70

In Stock

Quantity

1

Base Price: ₹ 23,387.70

GST (18%): ₹ 4,209.786

Total Price: ₹ 27,597.486

Quality Level

100

manufacturer/tradename

Roche

packaging

kit of for 20 isolations from 5 to 30 ml

Related Products

Img

Sigma Aldrich

03143422001

--

Img

Sigma Aldrich

05080576001

--

Img

Sigma Aldrich

03270289001

--

Img

Sigma Aldrich

11667327001

--

Img

Sigma Aldrich

11814770001

--

Img

Sigma Aldrich

12033674001

--

Img

Sigma Aldrich

11934317001

--

Description

  • General description: Plasmid recovery was tested with 50 μg purified plasmid. The recovery was >90%, with more than 80% in supercoiled form. The yield of plasmid DNA was determined by isolating pBS from DH5a cells. From 30 mL culture volume with a density of A600 between 3 and 6, >85 μg of plasmid DNA was obtained. The purity (checked by the ratio of A260/A280) is 1.8 + 0.2. No RNA is detectable. The kit components have been tested for the absence of nucleases according to current quality control procedures.
  • Application: The Genopure Plasmid Midi Kit prepares transfection-grade plasmid DNA in medium quantities (up to 100 μg plasmid) from bacterial cultures. Isolated plasmid is suitable for most molecular biology applications:TransfectionSouthern blottingSequencingPCRRestriction analysis Cloning
  • Features and Benefits: The Genopure Plasmid Midi Kit prepares highly purified plasmid DNA in medium quantities using a modified alkaline lysis method.Save time with ready-to-use reagents.Purify up to 20 samples (10 minutes hands-on-time/75 minutes overall).Purify all sizes and types of plasmid,even BAC DNA, since the crude lysate can be filtered to avoid plasmid shearing.Process multiple samples in parallelusing high speed gravity-flow columns.Eliminate the use of hazardous organic compoundssuch as cesium chloride, phenol, chloroform, and ethidium bromide.Obtain higher purity plasmid DNAover plasmid prepared by 2 x cesium chloride gradient centrifugation.
  • Components: Suspension BufferRNase ALysis BufferNeutralization BufferEquilibration BufferWash BufferElution Buffer,NucleoBond AX 100 ColumnsFolded Filters (150 mm diameter)Sealing Rings
  • Quality: Plasmid DNA purified by this kit has been tested for restriction digestion; pUC 19 was isolated from transformed HB101 as described in the protocol. 1 μg of plasmid was completely digested with 1 U Msp I for 2 hours at +37°C, as shown by agarose gel analysis.Plasmid recovery was tested with 50 μg purified plasmid. The recovery was >90%, with more than 80% in supercoiled form. The yield of plasmid DNA was determined by isolating pBS from DH5a cells. From 30 ml culture volume with a density of A600 between 3 and 6, >85 μg of plasmid DNA was obtained.The purity (checked by the ratio of A260/A280) is 1.8 + 0.2.RNA contamination was analyzed with 3 μg pBS purified with the standard procedure and checked by electrophoresis on an agarose gel. No RNA was detected.The kit components have been tested for the absence of nucleases according to current Quality Control procedures.
  • Preparation Note: The isolation procedure is based on a modified alkaline lysis protocol and can be divided into the following steps:The bacteria are partially lysed, allowing the plasmid DNA to escape the cell wall into the supernatant. The larger E. coli chromosomal DNA is trapped in the cell wall. The lysate is cleared of cellular debris by filtration or centrifugation, and the plasmid DNA-containing fraction is loaded onto a pre-equilibrated column. Since the cleared lysate is applied to the column in a low-salt buffer, plasmid DNA binds to the macroporous anion-exchange material in the column. Cellular impurities are eluted from the column with a high-salt wash. Finally, the plasmid DNA is eluted from the column. Recovered DNA is precipitated from the eluate to remove salt and concentrate the plasmid.
  • Analysis Note: Sample:E. coli culture that contains a high-copy number plasmid: 5 to 30 mL bacterial cultureE. coli culture that contains a low-copy number plasmid: 10 to 100 mL bacterial culturePlasmid Size: The isolation procedure is suitable for all sizes of plasmid. Note: Lysates of larger constructs (up to 100 kb) should be cleared by filtration rather than centrifugation to avoid shearing the plasmid.Time Required: 60 minutes (including filtration of the lysate)Typical Yield:High-copy number plasmid: 3 to 5 μg/mL cultureLow-copy number plasmid: 0.2 to 1 μg/mL cultureProduct Purity: Isolated plasmid DNA is free of other bacterial components, including RNA.
  • Other Notes: Ion Exchange Chromatography

SAFETY INFORMATION

Pictograms

GHS02,GHS05

Signal Word

Danger

Hazard Statements

H226 - H290 - H314

Precautionary Statements

P210 - P280 - P303 + P361 + P353 - P304 + P340 + P310 - P305 + P351 + P338 + P310 - P370 + P378

Hazard Classifications

Eye Dam. 1 - Flam. Liq. 3 - Met. Corr. 1 - Skin Corr. 1

Storage Class Code

3 - Flammable liquids

WGK

WGK 1

Flash Point(F)

100.4 °F

Flash Point(C)

38 °C

Compare Similar Items

Show Difference

Img

Sigma Aldrich

03143414001

--


Quality Level:
100

manufacturer/tradename:
Roche

packaging:
kit of for 20 isolations from 5 to 30 ml

Img

Sigma Aldrich

03143422001

--


Quality Level:
100

manufacturer/tradename:
Roche

packaging:
kit of for 10 isolations from 30 to 150 ml

Img

Sigma Aldrich

03200595

primary reference standard...


Quality Level:
__

manufacturer/tradename:
HWI

packaging:
__

Img

Sigma Aldrich

03202

purum, ≥97.0% (GC)...


Quality Level:
100

manufacturer/tradename:
__

packaging:
__