Thermo Scientific™ Barnstead™ LabTower™ RO Water Purification System

Description

• Convert tap water into reverse osmosis (RO) water with integrated 100L storage using the Thermo Scientific™ Barnstead™ LabTower™ RO Water Purification System, which allows the user to easily read parameters with an ultra-modern controller
• Mounted on casters, this compact system is an ideal pure water supply for any laboratory
• The system is well-suited as a feed water source for dishwashers, autoclaves and general laboratory use
• Choose from two system options with permeate flows of 20, 49 or 60L/hr
• Resistivity/conductivity is clearly displayed on a large back-lit control panel that tilts for optimum viewing
• Advanced technology in a mobile design: An ultra-modern microprocessor control provides easy-to-read system parameters
• Completely drainable integrated 100L high-purity water reservoir has a low-noise pressure booster as a standard component
• Mounted on casters, the compact LabTower RO system is an ideal pure water supply for any laboratory
• System is ideally suited as a feed water source for dishwashers, autoclaves and general laboratory use
• A built-in pretreatment unit — consisting of a hardness stabilizer for protection of the reverse osmosis module from hardness formers and an activated carbon/5μm combi-cartridge — protects the system against free chlorine and particles, ensuring the long service life of downstream purification stages
• Compact and mobile design: System includes three system options with permeate flows of 20, 40 or 60L/hr
• Stand-alone design with integrated 100L tank takes up ZERO bench space—casters allow for easy relocation
• Systems can be upgraded later to accommodate growing water capacity demands
• Integrated 100L reservoirL System stores 100L of  RO water in a high-purity polyethylene PE opaque reservoir
• Adjustable reservoir volume can be programmed for times of low demand—dispense from the reservoir to supply autoclaves, dishwashers, ultrapure water systems, etc
• Easy-to-operate clear display: Resistivity/conductivity clearly displayed on large back-lit control panel that tilts for optimum viewing
• Status of current operating mode clearly indicating “production”, “stand-by”, “cleaning” or “disinfection” modes
• Reservoir fill-level is shown as a percent
• System parameters are code-protected to prevent accidental changes to set points
• GLP-compliant documentation: LabTower RO has been developed to fulfill GLP requirements
• Recorded and traceable data can be obtained by printout via the RS-232 interface and accessory printer
• Highly qualified and precise measurement of the conductivity is ensured by the cell constant of 0.16 cm -1 .